2005 Cadillac Cts V Sedan 4-door 5.7l on 2040-cars

Auto blog

2015 Cadillac ATS, CTS recalled over brake issue

A problem with the brakes on the 2015 ATS and CTS has prompted Cadillac to issue a recall. According to the notice below from the National Highway Traffic Safety Administration, the issue revolves around the bracket that connects the brake pedal assembly and the rod that actuates the brakes. Even under normal operation, that bracket could fracture, impeding the ability to slow or stop the vehicle. That, as you're surely aware, could increase the risk of a crash. The issue affects a reported 2,163 vehicles in the United States. Owners will need to be bring their vehicles in to their local dealership to have those brackets replaced starting on August 1. See the complete recall notice below. RECALL Subject : Brake Pedal Bracket may Fracture Report Receipt Date: JUN 09, 2015 NHTSA Campaign Number: 15V358000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 2,163 Manufacturer: General Motors LLC SUMMARY: General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation. CONSEQUENCE: If the bracket fractures, the driver would not be able to apply the brakes, increasing the risk of a crash. REMEDY: GM will notify owners, and dealers will inspect the vehicle and replace any affected bracket, free of charge. The recall is expected to begin August 1, 2015. Owners may contact Cadillac customer service at 1-800-458-8006. GM's number for this recall is 15352. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

GM patent reveals new two-stage turbocharger

Modern turbochargers may be some of the best ever made, but performance is something that engineers are always trying to improve. According to GM Inside News, General Motors (GM) is hoping to alleviate some of the negative aspects of a two-stage turbocharger setup with a newly-patented design. The patent, that was filed on May 19, 2016, reveals a clever bypass system that allows the engine, a four-cylinder unit, to optimize both the low-pressure and high-pressure inlets for its respective functions. According to the filing, a conventional two-stage turbocharger setup is engineered to allow both turbines to operate simultaneously at low and mid engine speeds. At high engine speeds, only the low-pressure turbine works. The setup can't isolate either the low or high pressure side, which can impair low-end performance. GM's new two-stage turbocharger setup looks to eliminate this by linking the high-pressure turbo to the exhaust manifold through the high-pressure inlet duct. The low-pressure turbo is attached to the high-pressure turbo by a low-pressure inlet duct, which is linked to a connecting channel. A single actuator that is housed in the exhaust manifold creates a bypass that can opens the high-pressure inlet or close the connecting channel. Depending on what the engine load and speed is, the ECU guides the actuator—a single rotating spindle with discs corresponding to flanges on the high and low pressure sides—to isolate one of the two turbos. Isolating the turbos allow the respective inlets to be engineered for the best possible fluid dynamic performance. The setup should increase performance and decrease lag. There's no word on what car this setup will make an appearance on, but it will most likely be used in premium vehicles before trickling down to the rest of GM's vehicles. Related Video: News Source: GM Inside News, AutoGuide via GM Authority Cadillac Chevrolet GM Technology Sedan turbo patent engine turbocharging

Meet the next president's new Beast, a giant bomb-proof limo

We don't know who will be our president in 2017, but now we have a better idea of how that person will be transported on land. The next presidential limo, officially referred to as the presidential state car, will be another Cadillac. And a big one. You're looking at a lone spy photo of a car that will be of high interest to actual spies – not to mention Secret Service agents and lots of law-enforcement types. President Obama has been riding around in a Cadillac nicknamed The Beast for a while now. (It recently made an appearance on Comedians in Cars Getting Coffee.) Over the Secret Service radios, it goes by Cadillac One and Limo One. While the current car looks like a stretched Cadillac DTS sedan, it's actually kind of huge and built on a Chevrolet Kodiak medium-duty truck chassis. The same is likely to be true again, but this one will look a lot more like the latest Cadillac models. Through the camo we can see a front end reminiscent of the new CT6 large sedan. Imagine one of those scaled to about 5/3 of the production car and you've got the right idea. Fun fact: It will be the first presidential limo to feature Caddy's new wreathless crest logo on its grille. View 6 Photos As for features, we're in the dark and will remain so even after the new president-mover goes into service. The details are a legitimate matter of national security, but you can bet it's bulletproof, can withstand small bombs, and has some kind of onboard secondary air supply in case of a chemical or biomedical warfare attack. Oh, and it has that big red phone in back in the event things get really bad. The new one will no doubt carry the latest communications and safety technology. The new presidential limousine has been in the works for some time. The government sent out a request for proposals in 2013, and this model is expected to go into service sometime in 2017. Chances are it will make its debut at the inauguration of [INSERT CONTROVERSIAL NAME HERE] in about a year's time. Related Video: