2005 Buick Terraza Cxl 3.5l 7 Pass Dvd Park Assist 59k Texas Direct Auto on 2040-cars

Auto blog

GM applies to trademark Buick Envision GX

GM Authority found a GM application with the U.S. Patent and Trademark Office to reserve the name Buick Envision GX. We can't be certain, but it seems this all but confirms that the three-row Buick Envision, which debuted a year ago in China as the Envision Plus (pictured), will sell here as the Envision GX. Doing so would reinforce the naming convention established in the U.S. with the Encore and slightly larger Encore GX. Adding a third row to the compact two-row Envision extends three of of four dimensions. According to specs the Chinese transport ministry put online last year, the three-row Envision will be 190.7 inches long on a 111.5-inch wheelbase, increases of 8.2 and 2.1 inches, respectively. Height grows by 2.7 inches as well, only the 74.1-inch width holding steady.   That length has been utilized to make life easier for second- and third-row passengers. The Envision Plus in China comes with 2+3+2 seating, the second-row bench able to slide 9.8 inches. Behind that, cargo volume with the second and third rows stowed climbs from 52.7 cubic feet to 58 cubic feet. The sole engine will be the current Envision's 2.0-liter four-cylinder, making 228 horsepower and 258 pound-feet of torque, sent to the wheels through a nine-speed automatic. Power gets sent to the front wheels as standard, and all-wheel drive will be an option.  On top of the extended rear overhang on the seven-seater, GM designers slipped in a few cosmetic changes to set it apart from the five-seater. A new horizontal trim piece connects the headlights, the lower bumper getting a pair of larger, reshaped intakes. A complementary horizontal slash connects slimmer taillights, the license plate surround squared off instead of trapezoid-shaped.  Related video:

2014 Buick LaCrosse updated with new styling, tech

Buick might have one of the smallest lineups among major automakers, but by the time the 2014 model rolls around, it will definitely have one of the freshest. Debuting at the New York Auto Show this week, the 2014 Buick LaCrosse receives numerous styling changes inside and out, and it benefits from many of the same new features found on closely related models like the Cadillac XTS and the 2014 Chevrolet Impala.
Exterior changes are relatively minor, but they still help give the car a fresh, new look. The new face of the 2014 LaCrosse fits in with recently new or redesigned Buick models with its oversized waterfall grille, LED-trimmed headlights and the signature hood vents being moved to the side of the hood rather than the top. Similar changes have been made to the rear, like the reshaped LED taillights, the full-width chrome trim and a new fascia design; LaCrosse models equipped with the 3.6-liter V6 will still get the integrated exhaust finishers but they're executed in a more stylish manner than the current model. Finishing off the exterior, new wheel designs are also being introduced, which will include bringing 20-inch wheels to the sedan's option list.
Inside, Buick redesigned almost the entire cabin to create a more luxurious and upscale appearance. The instrument panel is essentially carried over, but pretty much everything else has been redesigned and updated with the biggest change being to the driver's area. Dual eight-inch configurable displays make up the center stack and gauge cluster, while the overall number of buttons have been reduced from 17 down to just seven. The 2014 LaCrosse will also be offered with the next-generation IntelliLink, which receives many of the same enhancements as Chevy's latest version of MyLink adding better customization, improved voice commands and more features including Pandora. Additionally, new door panels, seat and center console complete the LaCrosse's interior redesign.

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.