1949 Buick Super 56c Convertible- Restored Sequoia Cream 150 Pics Great Example on 2040-cars

Auto blog

Little-bit-bigger 2020 Buick Encore GX gets two three-cylinder engines

Ford broke the ice on selling three-cylinder engines in the U.S. with the 2014 Fiesta, then followed up with the EcoSport. Buick is about to widen that supermini-sized crack in the ice with the 2020 Encore GX. The semi-subcompact crossover will come in three trim levels that mix-and-match two turbocharged three-cylinder engines, two transmissions, and two drivetrains. The smaller engine is a 1.2-liter three-pot with 137 horsepower and 166 pound-feet of torque. This comes in one horse and 18 lb-ft of twist beyond the 1.4-liter four-cylinder in the smaller Encore. This engine will only be paired with a CVT and front-wheel drive in the Preferred, Select, and Essence trims. The meatier motor is a 1.3-liter three-cylinder with 155 hp and 174 lb-ft. That's down on the 163 hp and 177 lb-ft that the same engine produces in the Chinese-market version of the Encore GX. However, it gets buyers close to the 1.4-liter turbocharged four-cylinder that used to be optional on the smaller Encore, producing 153 hp and 177 lb-ft. This engine can be optioned on the front-wheel drive Select and Essence trims, where it would be mated to the CVT. The 1.3-liter three-cylinder is standard on all trims optioned with all-wheel drive, where it gets paired with GM's nine-speed automatic. GM does say the horsepower figures are estimates at the moment, so don't be surprised at any slight changes before deliveries begin next year. The Encore GX will serve buyers who would love it if the Encore had a bit more room but don't want to step up to the Envision. For a price GM hasn't announced yet, the Encore GX will reward those buyers with five more feet of cargo space, and some extra power for all those who decide to level up further. The junior Encore weighs just over 3,200 pounds, it's likely the Encore GX will shade that some. The Encore GX does ride on GM's new VSS-F platform, though, so the advanced architecture could provide an overall superior experience even with the lesser three-cylinder. GM has also said that the Encore GX will come standard with safety kit like forward collision alert and lane keep assist with a lane departure warning, features that are cost extras on the Encore. The Encore GX will also include automatic emergency braking, which can't be had on the Encore at any price.

GM seeks to exempt Buick Envision from U.S. auto tariffs

General Motors is seeking an exemption to a 25 percent U.S. tariff on its Chinese-made Buick Envision sport utility, the automaker said on Thursday, in a move to prevent the key model in the brand's U.S. lineup from becoming a victim of the U.S.-China trade war. The midsize SUV, priced starting at about $35,000, has become a target for critics of Chinese-made goods, including leaders of the United Auto Workers union and members in key political swing states such as Michigan and Ohio. The Envision, assembled only in China, last year accounted for about 19 percent of Buick brand sales in the United States. GM said in a statement that it filed the request on July 30 with the U.S. Trade Representative. An official notice was posted on Thursday on the regulations.gov website, which is tracking requests for exclusions from the so-called Section 301 tariff on certain imported goods from China. GM, the largest U.S. automaker, argued in its request that Envision sales in China and the United States would generate funds "to invest in our U.S. manufacturing facilities and to develop the next generation of automotive technology in the United States." GM said the "vast majority" of Envisions, about 200,000 a year, are sold in China. About 41,000 were sold last year in the United States. Because of the lower U.S. sales volume, "assembly in our home market is not an option" for the Envision, which competes with such midsize crossover vehicles as the Jeep Grand Cherokee and the Cadillac XT5. GM has taken other steps to soften the blow of tariffs, which hit just as the automaker had lowered the price of the Envision to make it more competitive. Ahead of the July 6 start for higher import tariffs, GM shipped in a six-month supply of Envisions at the much lower 2.5 percent tariff rate. Envision sales from April through June plunged to just 7,000 vehicles, while inventories climbed to more than 13,000 vehicles at the end of June. At the current sales rate, the Envision supply should be enough to keep many dealers stocked through the end of the year. GM had lowered prices by as much as $2,500 on the 2019 models, which it started shipping in late April. That means Buick's 2,000 U.S. dealers should have lower-priced Envisions to sell well into the fall. "The previous price point was too high" on the 2018 Envision, said Casey Clark, sales manager at Serra Buick GMC Cadillac in Washington, Michigan, in an interview.

Mark Reuss: GM can't afford product 'misses,' has 'thought about' CT6 V-Series

Mark Reuss is a busy man. He oversees General Motors' global product portfolio, an all-encompassing task for a company that sold more than 9.9 million cars and trucks last year. When GM launches a well-received product, like the road-going rocket ship that is the Chevrolet Corvette Z06 – he gets credit. When the company stumbles with the slow-selling Chevy Malibu or grapples with fallout from the decade-old Saturn Ion and its flawed ignition switch, he gets blamed. GM owners, the press and sometimes the federal government, demand answers. Bob Lutz famously held the job before Reuss. So did Mary Barra, who's now GM's chief executive. There's a New GM, but the lineage is connected to a long history. When he's not thinking product, Reuss, an executive vice president, also runs the purchasing and supply chain for the company, which is still one of the largest industrial empires in the world. We caught up with Reuss on the floor of the New York Auto Show, where GM had just rolled out two crucial new products: the 2016 Cadillac CT6 and the 2016 Chevrolet Malibu. Speaking with a small group of reporters, Reuss delved into a variety of subjects, including the new Malibu, Cadillac's future (he thinks the ATS-V is going to "flame the M3 and M4"), and other topics. On fixing the Malibu: "We can't miss. We can't have those kinds of misses [like the previous generation] on our cars and crossovers and trucks. We can't do that. If we do that, we give a reason for someone to go buy something else. It's that simple. "On a car like the Malibu we have a chance to really fix all of that, which we have, and then lead. Then you've got a real opportunity there. So that's what we've really been focused on here – to fix those things." He later added: "We need that car here to transform Chevrolet desperately because it's the heart of the market. And when you think of Chevrolet, people will come back and think about what we did with the [new] Malibu and the Cruze... It's hugely important to us." On Cadillac: "If we go out and try and out-German the Germans, it's probably not going to work. We've got an opportunity here generationally where there's a lot of people younger than me that have parents that drove BMWs and Mercedes, and I think there's an opportunity there for those people to drive something different than what their parents did, and I think that's always been an opportunity in the auto industry if you look at the history of it.