1970 Buick Skylark Custom Convertible 2-door 5.7l 4 Barrel Carb, on 2040-cars

Auto blog

Meet the Buick Velite 7, the Chevy Bolt's Chinese cousin

The Buick Velite 7 has officially been revealed after having been leaked and spied a few months ago. The name derives from Buick's line of electrified models it sells in China, of course the design shows it's most closely related to the Chevy Bolt EV. Buick hasn't revealed many details about it, and only one photo, but we do get to see it and we also have a range estimate. The range estimate is 500 kilometers on the NEDC cycle, which translates to 311 miles. That's actually less than the NEDC estimate for the Bolt EV, which is 565 kilometers or 351 miles, which increased for the 2020 model year from 520 kilometers or 323 miles. Of course NEDC figures tend to be much higher than EPA numbers, which rated the current Bolt EV at 259 miles and the previous version at 238. As such, we would expect this Buick to have an EPA range closer to 210 to 220 miles. We don't know what resulted in the lower range, but it could have something to do with additional weight or slightly worse aerodynamics. It could be both. Design-wise, the Buick is clearly based on the Bolt, but has a more aggressive front bumper and a trendy partially floating roof. It also seems to have a slightly boxier, taller profile, mainly because of the nose. Buick hasn't released any other details about the crossover, preferring to save them for the car's launch later this year. Since it seems so closely related to the Bolt, it probably has the same drivetrain: a single electric motor sending 200 horsepower and 266 pound-feet of torque to the front wheels via a single-speed transmission. Related Video:    

Next Buick Regal coming in 2017, could be imported from Germany

The Buick Regal is based on the Opel/Vauxhall Insignia, a pair of sedans from General Motors' European and British outfits. In fact, over 46,000 Regals from model years 2010 and 2011 were screwed together on the same lines as the Insignia twins, before GM's Oshawa, Ontario factory took over production fully. Considering this closeness, rumors that claim the next-generation Regal - due for 2017 - could move back to Europe aren't terribly surprising. Here's why, according to Automotive News.
Oshawa is home to three other vehicles, aside from the Regal - the Chevrolet Camaro, Impala rental queen and the Cadillac XTS. We already know next-gen Camaro production is headed to Lansing, MI, and that the fleet-only Impala will (finally!) die in 2016. As for the XTS, as AN explains it, sales are so slow that GM will either kill it or just shuffle its production volume elsewhere.
Taken along with the fact that Unifor, the Canadian labor union repping workers at the Oshawa factory, claim GM hasn't made any guarantees about future production at the nearly 60-year-old factory, it seems fairly clear that the Regal's current factory is going to be put out to pasture.

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.