Find or Sell Used Cars, Trucks, and SUVs in USA

1990 Buick Reatta Base Convertible 2-door 3.8l on 2040-cars

Year:1990 Mileage:19300
Location:

Penticton, British Columbia, Canada

Penticton, British Columbia, Canada
Advertising:

This is a 1990 Buick Riviera Sport Coupe powered by a 3.8 liter V6. This is a handsome luxury Sport Coupe produced by the Lansing Craft Center on Michigan. The Reatta sported it's own unique body style and was hand crafted with an attention to finishing uncommon for a mass produced automobile. This is one of just 2,132 that were produced in 1990. This car was sold initially in California and looks just like it was when sold new in 1990. The car is like new in every aspect and everything works as it was intended.

Auto blog

GM applies to trademark Buick Envision GX

Mon, Apr 18 2022

GM Authority found a GM application with the U.S. Patent and Trademark Office to reserve the name Buick Envision GX. We can't be certain, but it seems this all but confirms that the three-row Buick Envision, which debuted a year ago in China as the Envision Plus (pictured), will sell here as the Envision GX. Doing so would reinforce the naming convention established in the U.S. with the Encore and slightly larger Encore GX. Adding a third row to the compact two-row Envision extends three of of four dimensions. According to specs the Chinese transport ministry put online last year, the three-row Envision will be 190.7 inches long on a 111.5-inch wheelbase, increases of 8.2 and 2.1 inches, respectively. Height grows by 2.7 inches as well, only the 74.1-inch width holding steady.   That length has been utilized to make life easier for second- and third-row passengers. The Envision Plus in China comes with 2+3+2 seating, the second-row bench able to slide 9.8 inches. Behind that, cargo volume with the second and third rows stowed climbs from 52.7 cubic feet to 58 cubic feet. The sole engine will be the current Envision's 2.0-liter four-cylinder, making 228 horsepower and 258 pound-feet of torque, sent to the wheels through a nine-speed automatic. Power gets sent to the front wheels as standard, and all-wheel drive will be an option.  On top of the extended rear overhang on the seven-seater, GM designers slipped in a few cosmetic changes to set it apart from the five-seater. A new horizontal trim piece connects the headlights, the lower bumper getting a pair of larger, reshaped intakes. A complementary horizontal slash connects slimmer taillights, the license plate surround squared off instead of trapezoid-shaped.  Related video:

GM expanding Lansing Lambda CUV plant

Thu, 30 Oct 2014

Considering that crossovers are a rapidly growing portion of the US auto market, it's not surprising to hear that General Motors is preparing to build even more of them. The company is investing $63 million to expand its Lansing Delta Township Assembly plant that builds Lambda platform CUVs like the Chevrolet Traverse, GMC Acadia and Buick Enclave.
According to GM, the expansion will add roughly 263,000 extra square feet of space to the plant. Of that, 181,000 square feet will be for an updated body shop with cutting-edge robots. There will also be 54,000 square feet of additional room in the paint shop and 28,000 square feet of more area for general assembly.
GM isn't saying as much, but there is the possibility that this extra space could allow for additional models produced at the factory. Cadillac reportedly dropped plans to build a three-row SUV on the Lambda platform earlier this year, however, dealers for the luxury brand were recently pitched the possibility of adding large and small CUVs, an ATS convertible or a sedan below the ATS.

Buick lowering base prices on Regal, Verano

Wed, May 27 2015

Buick might have two new options for buyers in the market for an inexpensive luxury sedan. In a move similar to the introduction of the LaCrosse 1SV base trim a few months ago, the brand is ready to offer cheaper, entry-level versions of the Regal and Verano. Like the LaCrosse 1SV, the Verano 1SV mostly cuts dealer margins to reduce the cost for customers. The small sedan is priced at $21,065, plus $925 destination, which is a significant $2,315 drop compared to the next higher trim. The powertrain is still a 2.4-liter four-cylinder making 180 horsepower and 171 pound-feet of torque and a six-speed automatic, but buyers lose out on satellite radio. According to CarsDirect, dealers are making just $106 on this model, versus $935 on the higher grade. Meanwhile, the Regal 1SV charts a slightly different path to a lower price. The trim starts at $27,065, which is a $2,925 savings over the next trim. Buyers still get leather seats too, but the powertrain here is a 2.4-liter four-cylinder without eAssist that makes 182 hp and 172 lb-ft of torque and a six-speed automatic. That's a 77 hp deficit compared to the turbocharged Regal, and combined city/highway fuel economy dips to 23 miles per gallon combined, compared to 24 mpg with forced induction. Buick is introducing the 1SV models in hopes of grabbing more attention for the brand. "We added this new base level to some models as a means of expanding the opportunity for more customers to experience Buick vehicles. The addition of these trims will create an increased awareness and consideration of these vehicles when being compared to the competition," said company spokesperson Nick Richards to Autoblog. However, you might not see many of these inexpensive Buicks on the road. "On the Verano, we suspect dealers will opt to stay away from a car with around $100 between invoice and MSRP - that's the pattern we've been seeing on the LaCrosse 1SV, which is practically impossible to find," said CarsDirect Senior Pricing Analyst Alex Bernstein to Autoblog. Also, the Regal 1SV's switch to a less powerful, naturally aspirated engine "could be a turn-off for some shoppers," he said. Related Video: