08 Onstar Sedan on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

It looks like Buick is working on a new Regal GS

When Buick revealed its Regal-badged version of the Opel Insignia/Holden Commodore sedan and wagon, it left out one significant model, the GS. The high-performance Regal was missing in action, but these new spy photos seem to indicate one is coming soon. It looks like it will be pretty subtle on the outside. Upon close examination, we can see that each side of the front bumper features a much larger grille than the normal Regal Sportback and TourX. The thick upper borders on the grilles also look like good places for some LED accent or fog lights. These larger grilles appear to be the only significant difference to the front, though. On the sides, there are slightly deeper side skirts than those on a standard Sportback, and the rear bumper looks to be lifted from the TourX, but without the wagon's aluminum cladding. One other indication that this is a high-performance Regal is the car's front braking equipment. We can make out a Cadillac logo on the front brake calipers, which shows that this isn't running standard Regal stoppers. As for what's under the hood, it's tough to say, but we don't think it will use a turbocharged four-cylinder as the previous generation did. Instead, we think it may be using a V6. That's a hard maybe. The base Regal's turbo four makes as much power as the old GS, and although Buick could crank up the boost for more power, it could also make use of the V6 it will offer overseas. In the mechanically identical Commodore, a 308-horsepower V6 will be available along with a 9-speed automatic and the same type of all-wheel-drive system as the Ford Focus RS. This option would make the upcoming GS more powerful than the old one, and the new standard model, plus offer all-wheel drive. We would like to see even more power than 308, since the top-dog previous-generation Insignia OPC had a 325-horsepower V6. Related Video: Featured Gallery Buick Regal GS Spy Shots View 15 Photos Image Credit: Brian Williams Spy Photos Buick Hatchback Luxury Performance Sedan buick regal gs

Buick could import Envision crossover from China

Reports about the Buick Envision's likely arrival in the US go back even before the midsize crossover's debut in China last year, but the brand still doesn't have a official decision about whether to bring it here. According to The Detroit News, the company is somewhat concerned about a poor consumer reaction to launching a Chinese-made model in this country. Even if Buick officials are slightly apprehensive about the public perception, the concerns might not hold back the Envision in US. An anonymous source also tells The Detroit News that the brand intends to launch the CUV early next year and wants to sell around 40,000 of them annually. However, the UAW is reportedly not happy about the possibility of a Chinese-produced model coming here. The Envision launched at the Chengdu Motor Show as a step between the compact Encore and three-row Enclave. Power comes from a 2.0-liter turbocharged four-cylinder with stop/start and 256 horsepower and 260 pound-feet of torque. Buick offers the CUV with a six-speed automatic and all-wheel drive. The interior features active noise cancellation and an eight-inch infotainment system. The Envision also seems like a natural fit for Buick in the US due to the obvious hole in its CUV lineup, and the abundant rumors suggest that the brand sees the possibilities for it. The company now needs to decide whether to take a chance here and offer a vehicle from China.