2003 Buick Lesabre Limited on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

Next-gen LaCrosse, Cascada convertible coming to Buick showrooms in 2016

It's difficult to overstate how significant the post-bankruptcy years have been for General Motors' Buick brand. Arguably the most improved American automaker, Buick has rounded out its range with an excellent compact in the Verano, a well-balanced midsizer in the Regal and a segment-busting mini-CUV, with the Encore. Seeking to keep that momentum going, the next several years will see the brand address a trio of its most obvious issues. First and foremost will be a replacement for the aging LaCrosse, a vehicle whose only bit of attention since its 2009 debut was a very light refresh in 2013. According to Automotive News, we should expect the next-generation LaCrosse to arrive late next year or early in 2016, as a 2016 model. AN expects big design changes, as Buick attempts to further the LaCrosse from its popular platform-mate, the Chevrolet Impala. The changes won't be so radical, though, as to do away with its front-drive architecture, as the latest version of the Epsilon platform will underpin the next LaCrosse. The 3.6-liter V6 is likely to carry on, although a smaller, budget-minded offering is also extremely likely (we'll eat our hat if it's not the 2.0-liter, turbocharged four-cylinder from the Regal, Verano and Cadillac CTS et al.). The other issue plaguing Buick's lineup is a lack of a midsize crossover. This is particularly damning for the brand as most of its showrooms are shared with GMC, which boasts its own midsizer in the form of the Terrain. With the upcoming Envision (see here for teasers), that problem should be addressed. Like the LaCrosse, the Envision will likely be a 2016 model. It will debut and launch in China early next year, while we can expect it to arrive stateside later next year, or even early in 2016. For American consumers, both a 2.5-liter four-cylinder and the aforementioned 2.0T could see action in the Envision. Finally, while Buick can boast a pair of vehicles available with manual transmissions, it's still far from what we'd call a brand for fun driving experiences. Of course, one way of solving that problem is with a two-door convertible. Yes, it's extremely likely that the Euro-market Opel Cascada convertible will be sold in the US early in 2016. Whether it keeps the Cascada name is unclear (all in favor of Skylark, say "aye"). Regardless, adding a reasonably priced, relaxed, two-door droptop to the Buick range to fill the space left by the not-so-dearly departed Chrysler 200 Convertible seems like a no brainer.

GM may kill 6 car models as it works with UAW to tackle sales slump

The president of the United Auto Workers union said on Thursday the union is talking with General Motors about the potential threat to plants and jobs from slumping U.S. car sales. GM's response will be more trucks and SUVs, and sources say at least six slow-selling car models may be killed off. "We are talking to (GM) right now about the products that they currently have" at underused car plants such as Hamtramck in Michigan and Lordstown in Ohio, and whether they might be replaced with newer, more popular vehicles such as crossovers, Dennis Williams told reporters. "We are tracking it (and) we are addressing it," Williams added. GM has cut shifts at several U.S. plants this year as inventories of unsold cars have ballooned. Industry analysts said more jobs could be at risk as the automaker wrestles with permanently shrinking production of small and midsized sedans. GM is reviewing whether to cancel at least six passenger cars in the U.S. market after 2020, including the Chevrolet Volt hybrid, which could be replaced in 2022 with a new gasoline-electric crossover model, Reuters has learned from people familiar with the plans. Other GM cars at risk include the Buick LaCrosse, Cadillac CT6, Cadillac XTS, Chevrolet Impala and Chevrolet Sonic, sources said. Some analysts have singled out GM's Hamtramck plant in Detroit as one of the most vulnerable because of plummeting car sales. The plant, which opened in 1985, builds four slow-selling models: Buick LaCrosse, Chevrolet Impala, Cadillac CT6 and Chevrolet Volt. In the first half, it built fewer than 35,000 cars, down 32 percent from the same period in 2016, according to suppliers familiar with GM's U.S. production schedule. The typical GM assembly plant builds 200,000-300,000 vehicles a year.COMING ATTRACTIONS: TRUCKS AND SUVS GM must "create some innovative new products" to replace slow-selling sedans "or start closing plants," said Sam Fiorani, vice president of AutoForecast Solutions. The auto maker already has begun to shift future production plans from cars to trucks, according to Morgan Stanley auto analyst John Murphy. He estimates that fewer than 10 percent of the new vehicle models that GM will introduce over the next four years will be passenger cars, with the rest divided among trucks, SUVs and crossovers. GM plans to add production of the new Cadillac XT4 crossover next year to its Malibu sedan plant in Fairfax, Kansas.