2007 Buick Lacrosse Cxl Only 57k Miles Clean Non Smoker Lucerne on 2040-cars

Auto blog

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

GM posts $4 billion third-quarter profit thanks to trucks and SUVs

DETROIT — General Motors is posting huge third quarter numbers, pulling in $4 billion in profit over three months after losing money due to the virus outbreak. GM's adjusted earnings were $2.83 per share, easily outpacing Wall Street's per-share projections of $1.43, according to a survey by FactSet. Revenue of $35.5 billion also edged out most expectations. Shares jumped almost 6% before the opening bell Thursday. The company swung back from a $806 million loss in the second quarter, when it was restarting factories shuttered for safety during the early stages of the pandemic. The Detroit automaker joined most global automakers in reporting better-than-expected earnings from July through September as sales across the globe started to rebound from coronavirus lockdowns, especially in China. GM sales in China jumped 12% in the third quarter, with sales of its Buick and Cadillac brands both rising more than 25%. In the U.S., GMÂ’s most profitable market, sales fell 9.9% in the third quarter compared with a year ago, but were a dramatic improvement over the 34% drop in the second quarter. Sales improved sequentially each month, the automaker said, an encouraging trend. GMÂ’s profit was boosted by higher-priced pickup trucks and large SUVs, which have seen strong sales in the U.S. through the pandemic. It was the best quarter on record for GM's Chevrolet Blazer. Sales of the Cadillac XT6 spiked 45% in the U.S. over last year. Large pickups also sold well. GM also said it was pumping $2 billion into its Spring Hill, Tennessee manufacturing plant to push its transition to produce electric vehicles. Last week, crosstown rivals Fiat Chrysler and Ford reported strong third-quarter net income. FCA said it made $1.4 billion for the period, while Ford earned $2.39 billion. Related Video: Earnings/Financials Buick Cadillac Chevrolet GM GMC

Buick Wildcat EV concept previews the future of the brand

Once again, Buick has revealed a drop-dead stunner of a coupe concept, the Wildcat EV. And just like the Avista that came before it, don't get your hopes up too high for a production model. Buick hasn't said "no," but they haven't said "yes," either. But unlike the Avista, the Wildcat does give us a look at where Buick is going as far as styling, branding and technology. Also, did we mention it's freaking gorgeous? The Wildcat EV started out as a sketch by a Buick designer that caught the eye of the department, simply because it was really cool. The team started developing it further, and eventually the brand gave the go-ahead to bring it to the full-size concept you see here. It is purely a design concept, so although it's an EV by name, it doesn't have any kind of production powertrain or real specs. But it is designed with electric power in mind, as evidenced by the extremely long wheelbase and short overhangs. And this translates into Buick's electric future. The brand plans to be fully electric by 2030, and its first EV will launch in 2024 as a 2025 model. The shape of the coupe is very clean, simple and organic, but with interesting creases and intersections scattered throughout. It has wide haunches and a low, pointy nose. The grille is pushed down and made wide, which accentuates the shape of the car. The badge now sits atop the bumper, too. The greenhouse has blacked-out front pillars to create a wraparound look, and the roof has a gentle slope toward the rear. It incorporates a glass hatch, and the taillights blend into the glass and extend all the way up the rear pillars. While Buick isn't making a commitment either way for the Wildcat EV, these styling cues will appear on future Buick models. So imagine the front and rear fascias, the window treatment and sheetmetal detailing, but on other bodystyles, likely crossovers and SUVs. In fact, Buick said it has two models it will reveal later this year with some styling based on the Wildcat. Before we get too far from design, we should also highlight other cool aspects of the Wildcat EV concept. The wheels are turbine shaped as a throwback to Jet Age design and optimism. Each wheel took two months to produce and finish. The doors on the Wildcat are conventional, except for the gull-wing upper panels. They open up to make ingress and egress easier. And the interior is a gorgeous, mid-century-modern design.