2013 Buick Enclave Premium on 2040-cars

Auto blog

2017 Buick LaCrosse an evolution of sharp Avenir concept

After years as a bloated, uninspiring, but comfortable near-premium sedan, Buick has taken the wraps off a leaner, lither, far more stylish LaCrosse. The third-generation model has just made its debut at the 2015 Los Angeles Motor Show. While there's a lot to talk about, let's first address the new, Avenir-inspired sheetmetal. The fascia is basically the concept car smoothed over into production form, featuring the same winged trishield. In place of the chrome-trimmed waterfall, the LaCrosse gets a blacked-out, recessed grille with a chrome surround. It looks good in photos but it's better in person, adding a real sense of complexity and depth to the front end. The headlights and lower fascia, meanwhile, adhere closely to the concept. The same cannot be said of the LaCrosse's tail. While the taillight lighting pattern is similar, the overall shape of the lighting element is radically different, refining the design featured on the back of the Regal. Also gone, sadly, is the Avenir's boattail rear deck. Instead, the LaCrosse gets a small rear deck that curves up into a pleasant duckbill spoiler. The rest of the tail is pleasantly restrained. Perhaps the weakest point is the profile, where Buick has instituted a "split-spear" design, featuring a strong shoulder line above the rear wheel well, which sits below an even stronger character line that curves down and towards the front of the car. It strikes us as just a little too much, like the Impala. Underneath that sheetmetal, Buick has managed to trim nearly 300 pounds of body fat, nearly half of which came from the vehicle's actual structure. That 300 lbs, according to Buick's engineers, is equivalent to a Kenmore side-by-side refrigerator, in case you needed a helpful comparison. Despite the weight savings, Buick has upped the torsional rigidity for this new model by 15 percent. The LaCrosse's cabin features a strong, cockpit-like design, with a high, floating-bridge center console. This is possible due to Buick's adaption of the Electronic Precision Shift system, introduced earlier this month on the new Cadillac XT5. Despite the new-fangled console design, Buick's retained the wraparound cabin style introduced on the second-gen model. Based on a quick crawl around the interior, space is great in front, although ingress in back is somewhat difficult due to the roofline. You're probably wondering why we haven't said anything about the mechanicals just yet.

2018 Buick Regal TourX vs. wagon competitors: How it compares on paper

To the great joy of auto enthusiasts nationwide, wagons are back! Well, at least there's a few more of them. The latest is the 2018 Buick Regal TourX, which we just had our first drive of and found to actually be quite good with pleasant handling, solid power and plenty of space. But, how does the TourX compare to other cladded wagons? Well, let's dive into the specs and fire up the ol' spreadsheet maker for Buick Regal TourX vs Subaru Outback vs Audi A4 Allroad vs VW Alltrack vs Volvo V60 Cross Country. True, some are from mainstream brands and others are from luxury marques, but Buick straddles both realms, so it's appropriate to look at them all. Of course, there's more to these cars than just the numbers, but they're still important, and in the case of this class of crossover-aping wagons, can vary more than you'd expect. So check out the specs in the chart below, which are followed by more analysis and photos of each. Discover and compare other wagons and crossovers with our Car Finder and Compare tools. Engines and Transmissions When comparing powertrains, the Buick is far-and-away the winner as far as torque is concerned, and is in a nearly three-way tie for horsepower. Its 295 pound-feet of torque is 22 lb-ft more twist than the next-most-grunty Audi A4 Allroad. And in regards to power, the Buick's 250-horsepower engine is only down 6 hp to the most-powerful Subaru and its optional naturally aspirated flat-six, and just 2 hp less than the Audi. At the bottom of the pack is the Subaru Outback with the standard naturally aspirated flat-four, which only makes 174 hp and 174 lb-ft of torque. That may not seem too bad compared with the VW Golf Alltrack, which only makes 170 hp and 199 lb-ft of torque, but the VW is much lighter by between 200 and 300 pounds. Transmission-wise, there's quite a bit of variation in the group. The Regal TourX and the Volvo V60 Cross Country rely on eight-speed automatics, all Outbacks use CVTs, and the Alltrack and Allroad have dual-clutch automated manual transmissions with six and seven gears, respectively. But for people that want to shift for themselves, the only option is the Volkswagen, which offers a traditional six-speed manual transmission on the Golf Alltrack. Cargo and Interior Space One of the main reasons to buy a wagon is for the body style's large cargo capacity. And for the most space for things and stuff, you'll want to check out the Subaru and the Buick.

GM applies for 'Enspire' trademark for the second time

When we wrote about the Buick Enspire concept debut in China earlier this year, we said "we wouldn't be surprised to see either an all-new crossover, or a redesigned current model, sporting the designs seen on this concept." Now it appears General Motors might be planning to go with Option A. GM Authority discovered a trademark application for the name "Enspire," to be applied to "Automobiles, excluding motor homes." This is the second time GM filed for the name, the first being in 2015. As always, applications don't mean certainties. However, we know Buick has a range of new models in development, it's losing the LaCrosse sedan and its crossovers sell quite well. If there's to be a new vehicle called Enspire, it shouldn't be hard to guess what kind it would be. GMA's previous investigations picked up clues that there'll be two new Buick crossovers, one about the size of the China-sourced Envision and sitting on the E2 platform that supports the Cadillac XT4, Chevrolet Malibu, and Buick Regal. Based on data in an IHS Automotive document, the site said the putative Enspire's platform code is E2UB, the U for utility vehicle, the B for Buick. The other crossover would sit above an Envision, below the Enclave, on the short-wheelbase C1 platform employed by the Cadillac XT5. We can probably take the Enspire concept's design cues as a preview of the future, if not its electric drivetrain. Designers carved the wide, formidable stance with curved and elongated versions of traditional Buick brand cues, such as the grille crossbar stretching into the headlights. A futuristic, art-filled and screen-heavy interior contrasts with genuine wood, and is probably best not to look at because Buick couldn't bring anything like it to production. The electric drivetrain included a 550-horsepower electric motor and enough battery to power a 370-mile range. Those figures seem a little outlandish given the potential price tag and the Buick badge. Besides, GM has other plans for a dedicated EV powertrain in development that should bow around 2021, and a Buick EV based on the Chevrolet Bolt's BEV II architecture. As such, a conventional powertrain seems more likely for an Enspire crossover, at least initially. The same IHS Automotive document said the E2UB vehicle would go into production in Shanghai in late 2019.