2000 Buick Century Limited 61k. 1owner,3.1l V-6 Warranty on 2040-cars

Auto blog

Buick Enspire spied for the first time, loses concept's electric powertrain

About a year ago, Buick showed a high-performance electric crossover with wide, aggressive, curvy lines that was called the Buick Enspire. Now we have our first look at the production version. While it does seem to be styled like the crossover, it also seems to have lost its electric powertrain in favor of internal combustion. At the front of the crossover, we can clearly see it has the skinny, scowling headlights of the concept sitting high on the front fascia and flush with the hood. The main grille looks like it may be smaller, but it could also just be that the actual open section of the grille doesn't fill up the grille area of the fascia. In profile, the crossover has an attractive long nose, low roof and rising belt line. The rear shows the most change, as the rear pillars are much thicker, and the taillights don't appear to span the full width of the crossover. It's in the rear that we can also see the evidence that the Buick Enspire will actually be gasoline powered. Looking very closely under the rear bumper cover, we can see two exhaust tips turned to face the ground. Based on the size of the crossover, and the fact a Cadillac XT4 was being driven along with the prototype, the Enspire is probably using the XT4's platform, as well as its mechanical bits. That means it probably has a turbocharged 2.0-liter four-cylinder making 237 horsepower and 258 pound-feet of torque. Power will also probably go through a nine-speed automatic to either the front wheels or all four. This prototype looks to be pretty far along, so we'll probably see the production version in about a year. Considering the Enspire's size and likely powertrain, it may even replace the similar Buick Envision. And since the Envision is Buick's worst selling crossover (unless you count the Regal TourX as one), it would be ripe for replacement.

We really want to use an eCrate to restomod an old GM car. Here's what we'd build

You hopefully saw the news today of GM's introduction of its Connect and Cruise eCrate motor and battery package, which effectively makes the Bolt's electric motor, battery pack and myriad other elements available to, ah, bolt into a different vehicle. It's the same concept as installing a gasoline-powered crate motor into a classic car, but with electricity and stuff.  This, of course, got us thinking about what we'd stuff the eCrate into. Before we got too ahead of ourselves, however, we discovered that the eCrate battery pack is literally the Bolt EV pack in not only capacity but size and shape. In other words, you need to have enough space in the vehicle to place and/or stuff roughly 60% of a Chevy Bolt's length. It's not a big car, but that's still an awful lot of real estate. There's a reason GM chose to simply plop the pack into the bed and cargo area of old full-size SUVs. Well that, and having a rear suspension beefy enough to handle about 1,000 pounds of batteries.  So after that buzz kill, we still wanted to peruse the GM back catalog for classics we'd love to see transformed into an electric restomod that might be able to swallow all that battery ... maybe ... possibly ... whatever, saws and blow torches exist for a reason.  1971 Buick Riviera Consumer Editor Jeremy Korzeniewski: If you’re going to build an electric conversion, why not do it with style? ThatÂ’s why IÂ’m choosing a 1971-1973 Buick Riviera. You know, the one with the big glass boat-tail rear end that ends in a pointy V. Being a rather large vehicle with a big sloping fastback shape, IÂ’m hoping thereÂ’s enough room in the trunk and back seat to pack in the requisite battery pack. That would likely require cutting away some of the metal bulkhead that supports the rear seatback, but not so much that a wee bit of structural bracing couldnÂ’t shore things up. The big 455-cubic-inch Buick V8 up front will obviously have to go. Remember, this was the 1970s, so despite all that displacement, the Riviera only had around 250 horsepower (depending on the year and the trim level). So the electric motorÂ’s 200 horsepower and 266 pound-feet of torque ought to work as an acceptable replacement.   1982 Chevrolet S10 Associate Editor Byron Hurd: OK, so the name "E-10" is already taken by a completely different truck, but let's not let labels get in the way of a fun idea.

Buick Envision Plus is a seven-seater tweener developed for China

Buick has filled the gap separating the Envision and the Enclave with a new crossover named Envision Plus. Launched at the Shanghai auto show, the three-row people-mover is scheduled to go on sale in China later in 2021. The plus-sized Envision stretches 190.7 inches long, 74.1 inches wide, and 66.7 inches tall, figures that make it around eight inches longer and two inches taller than the regular Envision. It's also a full 14 inches shorter, four inches narrower, and three inches lower than the Enclave, which is the biggest crossover in the Buick range. Designers didn't settle for stretching the Envision's wheelbase. They gave the Plus a more upright front end characterized by a taller grille, a flatter and longer roofline, and a redesigned rear end accented by a strip of bright trim that connects the lights. Only photos of the upscale Avenir trim (shown above) have been published so far. Images of the cabin are not available yet. We expect the Plus offers an interior close to the standard Envision's — from the driver's point of view, at least. The biggest difference is that the longer Envision lives up to its name by letting motorists take more gear or kids along for the ride thanks to a more spacious trunk and third-row seats. Power for the Envision Plus comes from a turbocharged, 2.0-liter EcoTec four-cylinder engine fitted with 48-volt mild-hybrid technology. Bolted to a nine-speed automatic transmission, the turbo-four is the same basic engine found in the American-spec Envision, where it develops 228 horsepower and 258 pound-feet of torque, but figures for the Plus weren't released. Front- and all-wheel-drive models will presumably be available. Buick will release pricing information closer to the model's on-sale date. As of writing, the Envision Plus has only been announced for China, where it will be built, but unverified reports claim it will arrive in American showrooms before the end of 2021. We've reached out to the company, and we'll update this story if we learn more. 2021 Buick Verano Pro GS View 5 Photos What else did Buick show in Shanghai? Buick no longer sells sedans in America, but it remains present in that segment on the Chinese market. In addition to the Envision Plus, it unveiled a model named Verano Pro developed specifically for China, built locally, and aimed at relatively young buyers. At launch, motorists will be asked to choose between the regular sedan and a sportier-looking variant that wears the storied GS emblem.