Navigation- 8 Inch Screen W/ 60 Gb Hard Drive- 14 Speaker W/ 2 Subwoofers Sound on 2040-cars

Auto blog

Bentley plotting rear-drive Continental GT3-R?

Coupe, convertible or Flying Spur sedan: no matter what body-style you get, or what engine you specify, the Bentley Continental comes with all-wheel drive. It's been that way since the model line was first introduced a dozen years ago. But that looks poised to change... at least for one notable exception. According to Autocar, Bentley is all but certain to launch a rear-drive version of the Continental GT3-R sometime next year, ditching the front half of the drivetrain to cut a good 440 pounds off the curb weight to make it the lightest Conti yet. The Continental GT3-R launched last year with less weight and more power, along with a stiffer suspension, upgraded brakes and a titanium exhaust. It drew its inspiration from the Continental GT3 racer, but unlike the competition version, kept the AWD drivetrain in place. "A lot of people expected the GT3-R to be a proper rear-wheel-drive sports car," Bentley's chief engineer Rolf Frech said to Autocar, "but the problem was timing. We needed the car at the end of the first season of our GT3 racing car, and to do a proper change of the complete powertrain needed longer than we had. But we have the concept in our mind, so why not?" Denuded of its all-wheel drive, the Conti GT3-RS – assuming Porsche doesn't mind lending the name to its sister company – would be the most hardcore version of the go-to luxury coupe, and would promise to cut its already blitzkreig 3.6-second 0-60 time down even further. Especially if the 4.0-liter twin-turbo V8 were tuned to deliver even more than the 572 horsepower and 516 pound-feet of torque it already kicks out in the existing GT3-R. Chances are it'd be even less accessible, though: the 99 examples of the Conti GT3-R that are coming to the States out of the 300 total to be made already carry a $337k sticker price, and the rear-drive model would likely push the production:price see-saw even higher to the right.

Bentley releases new details on Continental GT3 racer

Porsche's new LMP1 Prototype isn't the only motorsports news coming out of Volkswagen AG this week. After unveiling its new Continental GT3 at the Paris Motor Show last year, Bentley has released some new images and details as this racecar continues its development. Similar to the Porsche announcement, Bentley's new GT3 marks a significant return to motorsports, only in this case, Bentley hasn't raced a car since 2003 - a winning effort at the 24 Hours of Le Mans.
From street to race form, the Continental has dropped about 2,200 pounds by shedding many of the luxury and tech features that make the street-legal Continental GT the car that it is - including 50(!) electronic control units. The Continental GT3 uses the same 4.0-liter, twin-turbo V8 as the road car, but we're guessing output has been tweaked a bit from the standard 500 horsepower. Except for the carbon fiber hood, decklid and doors, Bentley says that the body of the GT3 is a direct carryover from the Continental GT.
Inside, even a stripped interior and full roll cage won't stop Bentley from being Bentley as it gives this racecar the same attention to detail as its road cars - the seats, steering wheel and door pulls all receiving the hand-crafted treatment from the factory in Crewe. There is no word as to when the Continental GT3 will make its racing debut, but more details about the car can be found below in the official press release.

New Bentley Continental GT3 race car looks beautiful and brutal

Bentley has been building and racing GT3-class versions of the Continental GT since about 2013. As such, it's really no surprise that Bentley would create one based on the newest Continental GT, as seen above. Still, we're glad to see it, especially because it looks really mean, and better than the outgoing racer. Part of the design improvements are due simply to the new road car's looks. The lower, wider grille, and tidier, less bulbous tail do a lot to make the race car look much lower and more aggressive than the old car. But the racing-specific bodywork is cleaner and more aggressive, too. Large overfenders are fitted both front and rear, and they each have integrated intake vents at the leading and trailing edges. The openings at the front of the front fenders are curved such that they look a bit like angry eyebrows. The rear diffuser looks better integrated with the body now, rather than simply lurking behind a cut-down rear bumper. The big wing with outboard supports is also impressive. Performance-wise, there likely won't be a major difference between this and the outgoing car. It seems power is down a bit to over 550 horsepower rather than over 600 horsepower. Curb weight is estimated to be under 1,300 kg, which is about 2,866 pounds. That's also similar to the old car. Power also continues to come from a twin-turbocharged V8 sending power to the rear wheels. This is a sharp contrast to the road car's twin-turbocharged W12 sending power to all four wheels. For any enterprising racers looking to trade to a new car or get into a GT3, Bentley will begin selling the new Continental GT3 next June. Pricing has not been announced. Related Video: Featured Gallery 2018 Bentley Continental GT3 race car Image Credit: Bentley Motorsports Bentley Coupe Racing Vehicles bentley continental gt3