2012 Bentley Mulsanne. Artica With Twine. on 2040-cars

Auto blog

Baby Bentley studied for 2020, but it might not be cheaper

Bentley may step down a segment with a new, smaller luxury car that it hopes to have ready by 2019. The British luxury marque's fifth model line, assuming that its SUV ever makes it to market, though, is still in the earliest planning stages.
Kevin Rose, Bentley's head of sales and marketing, spoke with Autocar at the Geneva Motor Show about the proposed new vehicle. "At the moment, our line of thinking is for a smaller car. But smaller doesn't necessarily mean cheaper," he said. The brand believes the price floor of its models should be 100,000 pounds ($167,240).
The smaller Flying B isn't the only project being worked on. Rose hinted that it is considering an even more expensive model above the Mulsanne priced at around 300,000 pounds ($501,735) that would compete with the Rolls-Royce Phantom. "The twin pillars of the Bentley brand are performance and luxuriousness. Any car that offers something unique, with both of those bases well covered, is on the table," he said.

Bentley Continental GT Speed gets a little more juice

The latest version of the Bentley Continental GT Speed packs 633 horsepower, up ever so slightly from the 626 hp in the outgoing version launched in 2014, the 616-hp model that arrived in 2012, and the 602 hp offered in the first iteration from 2007. It also leaves the previous, 621-hp Supersports model in its wake, and further separates the flagship twelve-cylinder version from the lighter but less potent V8 model. Along with the relatively negligible 7-horsepower increase, the crew from Crewe also raised the torque figure by 15 pound-feet to a total of 619. As a result, Bentley says the latest flagship Conti will hit 60 in 3.9 seconds, down from the 4.0 flat the previous version was quoted at. No word on the top speed changing, but at 206 miles per hour, it didn't need much improvement in the first place. The Flying B marque has also launched a new Black Edition of the same model that offers a whole array of visual enhancements inside and out. As you might have guessed, it consists mostly of black trim, but also some contrasting aero components and leather trim. That's all well and fine, but we doubt most occupants would be paying much attention once all that power is deployed. Related Video: BENTLEY LAUNCHES NEW GT SPEED AND STRIKING BLACK EDITION - Continental GT Speed increases power and torque - Bold new Black Edition joins GT family - New and unique styling cues handcrafted to perfection at Bentley's Crewe factory (Crewe, 4 April 2016) Bentley unveils today the revised Continental GT Speed, raising the bar even further in terms of exclusivity and performance. The fastest production Bentley ever, with a top speed of 206 mph (331 km/h), now delivers even more power and torque, and a striking new Black Edition model joins the Speed family. Engineers at Bentley in Crewe have developed even more muscle from the Continental's iconic 6.0-litre twin-turbocharged W12 engine. The GT Speed now produces 642 PS - up from 635 PS - and 20 Nm of extra torque, bringing its total to a forceful 840 Nm. This additional torque is applied through the entire rev range via careful reoptimisation of boost control, raising the Grand Tourer's renowned "torque plateau" of continuous maximum torque delivery from 2,000-5,000 rpm, and bringing even greater acceleration performance. As a result, the 0-60 mph sprint time has dropped to just 3.9 seconds (0-100 km/h in 4.1 secs).

Bentley planning new Le Mans prototype for LMP2 class

Word has it that Bentley is planning a new Le Mans prototype racer. Speaking with Bentley chief Wolfgang Durheimer, Autocar reports that a new LMP2 project is underway at Crewe. The program would be run in-house instead of outsourced to a partner racing team. But while the prototype would likely use the company's 4.0-liter twin-turbo V8, the chassis by necessity would have to be outsourced: the three major sanctioning bodies recently got together to approve Dallara, Oreca, Riley-Multimatic, and Onroak exclusively to supply LMP2 chassis, so Bentley would have to base its design around one of theirs. The British automaker might have a number of reasons for restricting itself to the LMP2 class. Chief among them is likely the presence of both Porsche and Audi in the top-tier LMP1 category, and parent company Volkswagen's likely reluctance to send another one of its brands into the same fight. Another is budget: developing and fielding a competitive LMP1 program can be as costly as running an F1 team, whereas the prospect of sourcing and adapting an LMP2 chassis from an approved supplier would cost Bentley far less. But another factor not to be discounted is that Bentley may be choosing its battles carefully. Where the LMP1 prototypes are constricted largely to Le Mans and the FIA World Endurance Championship of which it is part, there are several series that top out at LMP2 – most notable the IMSA SportsCar Championship where Bentley is tipped to focus first, but also in the European Le Mans Series and Asian Le Mans Series. In fact [SPOILER ALERT] an LMP2 entry just won the 24 Hours of Daytona for the first time, beating out the Daytona Prototypes against which they compete. Those are bragging rights that Bentley could be keen to capture, and if it plays its cards right, it could sit out the LMP2 class at Le Mans and in the WEC altogether, rather than compete for second-tier victory behind its big brothers in LMP1. That would make this program radically different from the last time Bentley built a Le Mans prototype. In the early 2000s, Bentley fielded successive versions of the Speed 8 (pictured above) with a little help from Audi, winning the 24 Hours of Le Mans outright in 2003. The company then shut down the program, only to return to racing with the Continental GT3, developed with longtime Ford rally partner M-Sport and offered to privateer teams.