Gt 6.0l Nav Cd Air Bag Dual Air Bags Air Conditioning Dual Air Conditioning on 2040-cars

Auto blog

Bentley planning new Le Mans prototype for LMP2 class

Word has it that Bentley is planning a new Le Mans prototype racer. Speaking with Bentley chief Wolfgang Durheimer, Autocar reports that a new LMP2 project is underway at Crewe. The program would be run in-house instead of outsourced to a partner racing team. But while the prototype would likely use the company's 4.0-liter twin-turbo V8, the chassis by necessity would have to be outsourced: the three major sanctioning bodies recently got together to approve Dallara, Oreca, Riley-Multimatic, and Onroak exclusively to supply LMP2 chassis, so Bentley would have to base its design around one of theirs. The British automaker might have a number of reasons for restricting itself to the LMP2 class. Chief among them is likely the presence of both Porsche and Audi in the top-tier LMP1 category, and parent company Volkswagen's likely reluctance to send another one of its brands into the same fight. Another is budget: developing and fielding a competitive LMP1 program can be as costly as running an F1 team, whereas the prospect of sourcing and adapting an LMP2 chassis from an approved supplier would cost Bentley far less. But another factor not to be discounted is that Bentley may be choosing its battles carefully. Where the LMP1 prototypes are constricted largely to Le Mans and the FIA World Endurance Championship of which it is part, there are several series that top out at LMP2 – most notable the IMSA SportsCar Championship where Bentley is tipped to focus first, but also in the European Le Mans Series and Asian Le Mans Series. In fact [SPOILER ALERT] an LMP2 entry just won the 24 Hours of Daytona for the first time, beating out the Daytona Prototypes against which they compete. Those are bragging rights that Bentley could be keen to capture, and if it plays its cards right, it could sit out the LMP2 class at Le Mans and in the WEC altogether, rather than compete for second-tier victory behind its big brothers in LMP1. That would make this program radically different from the last time Bentley built a Le Mans prototype. In the early 2000s, Bentley fielded successive versions of the Speed 8 (pictured above) with a little help from Audi, winning the 24 Hours of Le Mans outright in 2003. The company then shut down the program, only to return to racing with the Continental GT3, developed with longtime Ford rally partner M-Sport and offered to privateer teams.

Bentley releases new details on Continental GT3 racer

Porsche's new LMP1 Prototype isn't the only motorsports news coming out of Volkswagen AG this week. After unveiling its new Continental GT3 at the Paris Motor Show last year, Bentley has released some new images and details as this racecar continues its development. Similar to the Porsche announcement, Bentley's new GT3 marks a significant return to motorsports, only in this case, Bentley hasn't raced a car since 2003 - a winning effort at the 24 Hours of Le Mans.
From street to race form, the Continental has dropped about 2,200 pounds by shedding many of the luxury and tech features that make the street-legal Continental GT the car that it is - including 50(!) electronic control units. The Continental GT3 uses the same 4.0-liter, twin-turbo V8 as the road car, but we're guessing output has been tweaked a bit from the standard 500 horsepower. Except for the carbon fiber hood, decklid and doors, Bentley says that the body of the GT3 is a direct carryover from the Continental GT.
Inside, even a stripped interior and full roll cage won't stop Bentley from being Bentley as it gives this racecar the same attention to detail as its road cars - the seats, steering wheel and door pulls all receiving the hand-crafted treatment from the factory in Crewe. There is no word as to when the Continental GT3 will make its racing debut, but more details about the car can be found below in the official press release.

VW announces reworked 6.0 W12 TSI engine

Nobody makes more engines with a dozen cylinders than the Volkswagen Group. They're W12s, of course, owing to the novel shape of their cylinder banks. Now the German industrial giant has announced a comprehensively reworked version of that engine at the same Vienna Motor Symposium where it presented its new 2.0-liter turbo four. The new W12 retains the same arrangement and the same 6.0-liter displacement, but updates it all with the latest powertrain tech. In place of Audi's FSI direct injection and Bentley's TMPI multi-point injection, the engine has adopted a new TSI system. It's also got a pair of new twin-scroll turbochargers, APS-coated cylinders, a new cooling system, active engine mounts, cylinder deactivation, and a stop/start system. And – crucially for application in the upcoming Bentayga – it has an oil circuit designed for off-road use. The revised package now produces 600 horsepower and 664 pound-feet of torque. Considerably more than the 567 hp and 516 lb-ft offered in the Bentley Continental GT W12, but less than the GT Speed, which we suspect will get an even more powerful version of this new engine. It's also more powerful than even the top version of Audi and Bentley's 4.0-liter twin-turbo V8, to make the W12 a more compelling option. Of course that's just as far as the Continental GT is concerned. The W12 has also found use in the Continental GTC and Flying Spur, as well as the Volkswagen Phaeton and Audi A8, and could find further applications under the Flying B emblem and elsewhere in the future. VW says that in the right application (say, in the production version of the Bentley EXP 10 Speed 6 concept, for example), the new twelve-pot could deliver 0-62 times of under four seconds and a top speed in excess of 186 miles per hour. Volkswagen at the 36th International Vienna Motor Symposium Dr. Heinz-Jakob Neusser: "The car of the future will continue to fascinate people" - CO2 reduction, electromobility and digitalisation are the greatest challenges facing the automotive industry - The future of the internal combustion engine will be characterised by high rpm diesel and high-performance three-cylinder TSI engines - Laser roughening – innovative coating process in large-scale production - New 6.0 W12 TSI with 447 kW (608 PS) – performance and refinement - New generation of EU6 TDI engines for light-duty vehicles Dr.