2010 Bentley Flying Spur Speed! Low Miles! $228965 Msrp! Loaded! Fresh Service! on 2040-cars

Auto blog

Rhys Millen will drive a Bentley Bentayga at Pikes Peak

Despite Bentley positioning its Bentayga SUV as a luxury vehicle, Bentley doesn't want us to forget that it's also a storied motorsport brand. Even the Bentayga can be used for record hunting, as Bentley is eager to show. It has hired two-time Pikes Peak hill climb winner Rhys Millen to take a Bentayga to the mountaintop. With the production SUV record in its sights, Bentley's Motorsport wing in Crewe has prepared a Bentayga for the attempt (which will be used as a benchmark for the Lamborghini Urus). The vehicle has been kept as stock as possible, as per the rules, and for safety reasons it features a full roll cage, a fire suppression system, racing seats and a harness. Still, Bentley has also enlisted exhaust crafters Akrapovic to give it a custom setup; Akrapovic has also done the exhaust for the Continental GT3-R. But the air suspension with its electric anti-roll control is kept stock, and the Pirelli rubber is also off-the-shelf stuff. The W12 engine's 600hp/664 lb-ft power figures also match the unmodified versions. We reported on Bentley's inclusion at the June 24 event earlier, but at that point the driver had not yet been announced. Millen, 45, from New Zealand, is reportedly the second-most-prolific Pikes Peak competitor in the world. The current production SUV record stands at 12:35.61, set by Paul Dallenbach with a Range Rover Sport in 2013. The Pikes Peak Bentayga's exterior has been finished with an unmistakable Radium Satin hue, but other than that and the carbon fiber body kit, it appears more like an everyday, run-of-the-mill Bentayga, not a wild Pikes Peak racer with a bookcase for a rear wing. Related Video:

Bentley Continental Flying Spur taking shape

The redesigned Bentley Continental Flying Spur has again been caught undergoing testing, though this time away from public roads while tackling the Nürburgring's 154 turns. The car we see in these new spy shots also reveals more of the Flying Spur's new lines, which we expect to largely mirror the shape already seen on the new Continental GT and GTC models.
Likewise, the new four-door Continental will probably come with the same engine options as the coupe and convertible: the tried and true 6.0-liter W12 making 567 horsepower and the new twin-turbo 4.0-liter V8 producing 500 hp. Its two stablemates were also updated with an eight-speed transmission for 2012, so expect the Spur to swap that many gears, as well.
Really, the only unknowns left are how Bentley will be handling the four-door specific design elements like the shape of the rear end, which is somewhat obscured by this car's checkerboard camo, as well as when the sedan will debut. We've received no indication thus far that Bentley is planning to use the Paris Motor Show, which happens later this week, for the Flying Spur's unveiling. That leaves a string of upcoming shows where it could happen, including the LA Auto Show, Detroit Auto Show and Geneva Motor Show.

New Bentley interior veneer sourced from American Red Gum trees

Bentley is turning stateside for its newest exclusive wood interior finish, sourcing its first new veneer in five years from American Red Gum trees found in Mississippi wetlands. Bentley calls the new veneer Liquid Amber, a reference to the wood's perfumed scent. The red-hued wood undergoes a weeks-long natural smoking process to deepen its brown luster. Afterward, the veneer is then transported to Bentley's wood shop in Crewe, England, where it's examined alongside the six other types of veneers harvested from China to Canada to determine suitability, based on a high-burr density, minimal sapwood and a lack of bark growth or structural defects. Bentley says it rejects between 30 percent and 70 percent of all veneers offered. Raw veneer is then cut to a precise 0.6-millimeter and tested for stability in UV light and consistency from tree to tree. The whole process takes at least 18 months before the veneer is installed in one of Bentley's vehicles, which start at $189,000 for the Flying Spur sedan. Also known as the Sweetgum tree, the American Red Gum is native to lowland areas of the southeastern United States. It was once used commercially for soaps, adhesives and pharmaceuticals but is valued today primarily for use in furniture, cabinetry and interior finishing. Bentley says it harvests the trees only twice a year due to restricted access to the wetlands where it sources the wood. Bentley also announced it has begun using slate and quartzite stone veneers sourced from select quarries in India. They're split from a larger stone piece, cured using fiberglass and a bespoke resin, and shaped and finished by hand by the Mulliner coach building team in Crewe.Related Video: Featured Gallery Bentley wood finish Image Credit: Bentley Bentley Luxury bentley flying spur