2005 20' Inch Rims Cypress on 2040-cars

Auto blog

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.

Updated Bentley Bentayga spotted testing in the snow

It seems that the Bentley Bentayga is up for a refresh. These spy shots, fresh in from frigid-looking Europe, show us a Bentayga that’s adopted a front end thatÂ’s much closer to the Flying Spur and the slinkier Continental GT. That means larger secondary lamps up front, a revised lower fascia, and slimmer taillights with a pronounced oval element thatÂ’s echoed in the dual exhaust pipes. Unlike the last Flying Spur we spotted, which was a prototype of a likely plug-in hybrid variant, this Bentayga doesnÂ’t appear to have dual filler doors, one for gas and one for a plug. ThatÂ’s not to say one isnÂ’t coming; the Bentayga will almost certainly get an updated version of the PHEV powertrain that failed to win us over on our last drive. Hopefully that, too, will get an update to make its groaning V6 less sad-sack and provide a little more oomph to its pure EV mode. As with the expected PHEV variant, we think that the Bentayga will get the rest of the Flying SpurÂ’s engine options Â… which for now is a singular W12 sporting twin turbos. We believe a V8 should follow in both models. Inside, expect changes to mirror the tech and interior features of the latest Bentley models. Maybe itÂ’ll even get the quilted leather found on the $15,000 Mulliner package. WeÂ’ll know for sure when Bentley pulls the sheet off the revised Bentayga soon.

Bentley will build 1929 Team Blower continuation series of 12 cars

Bentley considers Sir Tim Birkin’s supercharged 4 1/2 -liter Team Blower race car to be the company's "most revered heritage car" ever. So revered, in fact, that Bentley wants to make the car again, 12 times over. With the help of some reverse engineering by Mulliner, Bentley has announced its intentions for an extremely special continuation series limited to only a dozen examples built nearly identical to the original.  Through various methods, Bentley has been celebrating its heritage all throughout 2019, the centenary of the brand's founding. Just in the summer months, Bentley released the third-gen Flying Spur, unveiled the EXP 100 GT autonomous electric concept, built a Continental GT convertible that honors the 1929 Blower Number 1, won Best of Show at the Pebble Beach Concours, and re-created 1939 Corniche sedan with the help of Mulliner. That last achievement is particularly relevant, as Mulliner typically crafts bespoke new cars, as opposed to building old ones. After successfully bringing the Corniche into the 21st century, however, Bentley is confident Mulliner can take on the complex task of rebuilding the legendary Team Blower.  Bentley claims this will be the world's first continuation of a pre-war race car, and the original production run didn't even make it to double digits. Only four Team Blowers were built for Birkin and the boys to race, which they did at Le Mans and all over Europe. Bentley is building 12 re-creations because that's how many races the original cars competed in. In order to take this project on, Bentley will disassemble Team Blower chassis No. HB 3404 down to its nuts and bolts. The parts will all be cataloged and 3D scanning of each individual piece will create the foundation for the new cars. Bentley will then combine use of the original 1920s molds and tooling jigs with modern manufacturing methods to create 12 identical sets of parts. The new cars will be as close to identical to the original car as possible, but current safety regulations will force Bentley to make a few changes and alterations. Under the hood, the Continuation Series cars will have 16-valve four-cylinder engines with aluminum crankcases, cast-iron cylinder liners, and non-detachable cast-iron cylinder heads. With the help of Amherst Villiers Mk IV roots-type supercharger replicas, the 4,398 cc engines will be rated at 240 bhp at 4,200 rpm.