13 Bentley Gtc Mulliner Pkg 9k Miles Carbon Fiber Rear Camera Contrast Stitch 14 on 2040-cars

Auto blog

Bentley unveils 202-mph Continental GT Speed Convertible

That purple haze all in your eyes is the 2013 Bentley GT Speed Convertible. The cynical view is, "Bah, take a GT Speed and cut the top off. There. Pass the salt, please...". But when you're Bentley, more than 90 years old, and charging these kinds of ducats, there's no reason to take the cynic's shortcut. So of course the GT Speed Convertible gets all of the Speed-family accoutrements: matrix radiator grille hiding a twin-turbocharged, 6.0-liter W12 with 616 horsepower and 590 pound-feet of torque, eight-speed ZF transmission enabling 15 percent better fuel economy, beefier lowered suspension, larger rifled exhaust tips, inlet manifold finished in black crackle and a Mulliner Driving Specification cabin.
Among the many refinements added to the convertible, though, are neck warmers in the seats, the 21-inch wheels unique to this car, class-leading stiffness - admittedly, it's a very small class, but its torsional rigidity of 22,500 Nm/degree is only 500 Nm below that of the Lamborghini Gallardo coupe. The stiffening required to achieve that number will undoubtedly have something to do with the 485-pound weight gain over the GT Speed Coupe.
Still, when the GT Speed Convertible weighs 5,500 pounds, what's a few hundred between friends? More importantly, the weight doesn't scuttle performance: 0-60 comes in 4.1 seconds, a tenth shy of the coupe. The gap stretches as you approach The Ton, the GT Speed Convertible needing just 9.7 seconds to get there, the coupe just nine seconds. Trust us, though, everyone will be too busy blasting along to notice. Everyone will want to pack light, however, because the Speed Convertible loses 3.5 cubic feet of trunk space. It remains the fastest four-seat convertible in the world with a 202-mph top speed.

First new Bentley Blower built since 1930 is now being tested

Just over a year after announcing the program, Bentley has finished building its first Blower car since 1930. It's called "Car Zero" since it's not one of the 12 customer cars. Instead, this first car is a prototype that will undergo testing before the customer cars begin production. Bentley says this car took 40,000 hours to complete. The company figured out how to build it based on existing tooling and blueprints, as well as laser scans of the components in the company's 1929 race car on which the continuation models will be based. The company collaborated with a variety of outside companies for help with the frame, radiator shroud and leaf springs. The frame was built by a company that builds and restores boilers for steam engines. Bentley itself also built a custom stand so it could hook up the recreated 4.5-liter supercharged four-cylinder to its modern-day engine dynamometers for break-in. Now that this prototype has been completed, Bentley will begin testing it for durability. The planned testing should recreate just under 22,000 miles of regular driving and nearly 5,000 miles of track driving. The company will also do a top speed run with it. Once testing is complete, Bentley will start building the 12 customer cars, all of which have been sold and specified. While many are likely excited about this new Bentley, there are a handful of car enthusiasts that probably don't share the excitement. Earlier this year, several of these wealthy enthusiasts, including fashion mogul Ralph Lauren, sent a letter to Bentley expressing concerns that these continuation cars will reduce the value, both monetary and intrinsic, of the original cars. The complaint obviously hasn't had an effect on Bentley's plans. Related Video:

Bentley Continental GT3 Pikes Peak racer puts out 750 horsepower on biofuel

Bentley revealed its Continental GT3 Pikes Peak car to us earlier this year, but was short on engine details. That left us especially curious, as Bentley foreshadowed lots of modifications and a promise that it’d run on a renewable biofuel. Of course, more power than standard was expected. Today, all the details of this wild Bentley are available. Its 4.0-liter twin-turbo V8 engine will make “more than” 750 horsepower and 738 pound-feet of torque. ThatÂ’s a 100 horsepower increase over the most potent street version of the Continental, the Continental GT Speed. HowÂ’d Bentley do it? For starters, Bentley began with the GT3 race version of its 4.0-liter V8, not the street version. But Bentley went to town on this race engine for Pikes Peak anyway. It has new pistons and connecting rods, plus the boost is turned up to 2.2 bar with larger turbos. The carbon fiber intake manifold is reinforced and made thicker than the standard one. Plus, one-off exhaust manifolds made from Inconel alloy by Akrapovic are fitted. The exhaust ultimately exits via very short pipes just behind the front wheels. Not very Bentley-like. Cooling is reinforced by a secondary cooling system positioned in the rear of the car. The rear windows are traded for air scoops that channel air through a second radiator, exhausting heat through ducts in the trunk lid. It all runs off a dedicated secondary water pump. Another change youÂ’ll find at the rear is a new driveshaft with a larger diameter for better durability. The biofuel Bentley uses is called 98RON Renewable Racing Fuel, and Bentley says it is "a dedicated blend of advanced biofuels specifically designed for motorsport, and is a technological stepping stone to sustainably-created eFuel with a greenhouse gas reduction of up to 85%." Bentley didn't say what the emissions reduction was for this specific biofuel in the Pikes Peak car. When it comes to handling, Bentley says it has significantly modified the GT3 setup. ItÂ’s running far more camber in front and rear. Softer springs and anti-roll bars were fitted to allow more body movement and maximize weight transfer for braking (keep in mind all your braking will be done while going straight uphill). Plus, the brakes themselves are newly water-cooled to handle the extreme loads that this hill climb will put on them. You can watch out for Bentley's attempt at a record on June 27, a day that will mark the 99th running of the Pikes Peak International Hill Climb.