2006 Bentley Flying Spur Silver Tempest Portland Leather Nav Only 31,600 Miles on 2040-cars

Auto blog

2015 Bentley Continental GT3-R First Drive [w/video]

Racecars break. F1, NASCAR, IndyCar, GT3 – you name it – every go-fast machine built for the track is living on borrowed time. So it wasn't a complete surprise when, after traveling halfway around the world to drive Bentley's Continental GT3 racecar, the darn thing unceremoniously blew its rear differential on someone else's hot lap. While mentally recalibrating to the idea that my only takeaway from the three day commitment might be frequent flier miles, I realized an alternate vehicle on hand could make the trip worthwhile: the roadgoing, not-so-evil twin to the all-out race machine, the 2015 Bentley Continental GT3-R. You can hardly blame Bentley for the failure to proceed. The Flying B has been performing swimmingly well in the Blancpain Endurance Series, scoring three wins in its debut season and racking up a respectable 2015 so far. The dropped, spoilered, and severely trimmed-down GT3 racer reflects a ruthless abandon of all things luxurious and civilized. Over 50 ECUs were ditched from the road car; the doors alone, which typically weigh a lofty 125 pounds apiece, have been trimmed down to a wispy 15. Yes, the race version is a fearsome, sexy beast – and yes, this was quickly proving irrelevant because that drive was simply not meant to be.The Next Best Thing It's hard to call a $339,725 exotic a consolation prize. Climbing into the roadgoing GT3-R reveals a dramatic departure from the standard issue Conti: Not only is the color scheme unexpected (acid green on black and grey), so is the choice of materials (carbon fiber, Alcantara, not an inch of wood veneer in sight). Some pesky legacy remnants remain (antiquated navigation system, some weirdly pedestrian VW-sourced buttons and switches), but there's also a smattering of sweet details (those famous organ stop air vents, the green center indicator on the steering wheel, the pleasantly gripped Alcantara shifter). In all, 300 examples are being built, 99 of which are destined for the US. Unlike the somewhat sonorous GT V8 S upon which it's based, the GT3-R's titanium exhaust enables an even more exuberant, unapologetic, voluminous roar. Those exhaust gases are summoned from the 592-horsepower, 553-pound-foot, twin-turbocharged 4.0-liter V8, which gains 71 hp and 51 lb-ft over the V8 S model it's based on.

Bentley GT3-R is the most hardcore road-going Continental yet

A factory-entered Bentley hadn't won a top tier race in the UK for 84 years when the Continental GT3 recently took victory in the second round of the Blancpain Endurance Series at Silverstone. It was an early success for a racer that only hit the track competitively for the first time late last year at the Gulf 12 Hours in Abu Dhabi. To capitalize on the potent platform, Bentley is bringing it to the street with the limited-edition Continental GT3-R.
Limited to just 300 units worldwide, this bruiser starts as any other Continental GT on the assembly line in Crewe, England, but then Bentley Motorsport get ahold of it to painstakingly improve its performance. Like the racer, GT3-R uses the 4.0-liter, twin-turbo V8, and here, power is cranked up to 572 horsepower and 516 pound-feet of torque, 51 hp and 14 lb-ft better than the GT V8 S. The muscle is routed through an eight-speed automatic gearbox from ZF with shortened gearing and a rear-biased all-wheel-drive system with torque vectoring for the rear wheels. The weight also comes down over 200 pounds from the V8 S to 4,839 pounds. Bentley claims all the tweaks are enough to hustle the GT3-R to 60 miles per hour in 3.6 seconds, on to an estimated top speed of 170 mph.
To handle all that power, an air suspension holds up all four corners, and the brakes use carbon silicon carbide discs for plentiful stopping power. A titanium exhaust saves an additional 15 pounds of weight, and Bentley promises that it gives the car a baritone growl.

The 2020 Bentley Flying Spur has 3-D wood now, and it looks spectacular

This is the coolest wood you’re going to see today. We promise. Bentley is now manufacturing something it calls “Three-Dimensional Wood.” And yes, all wood we come into contact with is 3-D, but this stuff pops out at you like people and items do in a 3-D movie. YouÂ’ll find it in the rear door inserts of the Bentley Flying Spur, assuming the owner checked the box. One look at the photos will have you going, “how the Â… ?” Yes, itÂ’s pretty wild to see, and we can imagine the effect it has in person is even stronger. Bentley did explain how it made wood look like the diamond-quilted leather it uses in its seats, though. As one would expect from Bentley, itÂ’s a hell of a process.  Each rear door and quarter panel is crafted out of a single block of wood. Bentley uses either American Walnut or American Cherry timber. They start by machining the back of the log to match a die-cast aluminum door panel template. ItÂ’s bonded to the template, and then the difficult work begins. Skilled craftspeople carve the wood to its three-dimensional surface with a multi-axis routing machine to a tolerance of 0.1 mm. They then hand finish the cuts to achieve perfect results. Finally, a lacquer is applied to attain the color and texture that Bentley desires. Left: EXP 10 Speed 6 Concept; Right: Production Flying Spur pattern This design of wood was first seen in a Bentley concept from 2015. It was called the Bentley EXP 10 Speed 6 (shown above, left). After the positive reaction to that design, Bentley says it felt a production adaptation was in order.  “Three-Dimensional Wood is the next interior design element weÂ’ve taken from concept car idea to production reality,” Brett Boydell, Head of Interior Design for the Flying Spur said. “It works in perfect harmony with the three-dimensional leather quilting across the cabin of the Flying Spur and creates an even more special environment for those being driven.” If you were to count the number of carved diamonds in the wood, youÂ’d come to a total of 150 in the Flying Spur. As of now, the big sedan is the only Bentley this option is available in. We wouldnÂ’t be surprised if it expanded to others in the future. In addition to that, this is a design that could be translated into lesser luxury cars using cheaper processes and 3-D printing. Bring on the 3-D wood. Related Video: