3.0i 2 Dr Convertible Gasoline 3.0l L6 Fi Dohc 24v Sienna Red Metallic on 2040-cars

Auto blog

BMW shows 670-hp plug-in 5 Series GT concept

BMW quietly revealed a 5 Series GT concept earlier this week at an event in France, and it sports a plug-in hybrid powertrain capable of a whopping 670 horsepower. Think the upcoming Model X crossover from Tesla sounds good? BMW has something that might be just as enticing for eco enthusiasts who like their cars to be green and mean. BMW quietly revealed a 5 Series GT concept earlier this week at an event in France, and it sports a plug-in hybrid powertrain capable of a whopping 670 horsepower. That's right, a hybrid BMW hatch-crossover with more estimated power than the 2015 Chevrolet Corvette Z06. BMW's setup is called "Power eDrive," and it uses a 20-kilowatt-hour lithium-ion battery pack that provides juice for two electric motors; they work with a 2.0-liter turbocharged four-cylinder engine. This 5 Series GT would be able to travel for 62 miles under electric power. The prototype shows the high-performance potential of the system, but the 5 Series GT is "purely a concept," BMW spokesman Julian Arguelles told Autoblog. The GT made its global debut alongside plug-in versions of the 3 Series and X5. They used more basic eDrive systems with one electric motor teamed with a turbo four cylinder. BMW revealed the prototypes to illustrate its plans to increase production of plug-in hybrids. Its goal is to add plug-in variants to all of its "core-brand models," though specifics and timing are unclear. BMW Group Media information 1. BMW Group Innovation Days 2014: New drive technologies. (Introduction) The recently launched BMW i3 and BMW i8 are the first zero-emission vehicles in the premium segment, being designed respectively as dedicated all-electric and plug-in hybrid models. Their BMW eDrive technology promotes hallmark brand driving pleasure, while at the same time delivering major reductions in fuel consumption and CO2 emissions – all the way to zero tailpipe emissions when operating in all-electric mode. This is BMW Efficient Dynamics taken to its logical conclusion. For more than 15 years, the Efficient Dynamics strategy has inspired and shaped the development of new models across all the BMW Group brands, resulting in the development of highly efficient vehicles that combine dynamic performance with intelligent energy management. Today, thanks to Efficient Dynamics, the BMW and MINI brands offer premium models that set benchmarks in their respective segments in terms of their exceptional balance of performance and fuel economy.

BMW and Mini getting GoPro integration

The small, high-quality and relatively inexpensive GoPro camera has been revolutionary for Internet video, especially of cars. Imagine how much awesomeness and hilarity we would have missed without them. Finding ways to integrate the cams into performance cars is becoming increasingly popular among automakers, as well. For example, the 2015 Chevrolet Corvette has its Performance Data Recorder, and Volkswagen is giving GoPros to early buyers of the 2015 GTI. BMW Group is going straight to the source for its rendition, though, with a new app that allows drivers to control a GoPro from inside of some BMW and Mini vehicles.
In July, owners with 2012 or later models equipped with BMW Apps or Mini Connected can download the new app. There are a few hurdles to jump over, though. Not only do users need a model with the infotainment system, a WiFi-equipped GoPro camera is also required. The app also must be installed on an iPhone connected to the vehicle.
Once all of those stipulations are met, the app can configure and control the GoPro through iDrive and display a nearly live image on the infotainment system. Menus are simplified on-screen but still allow users to select among six camera modes, aim it and start and stop recording. While filming, it shows recording time, battery life and signal strength. While BMW's approach isn't quite as nicely integrated as the Corvette's solution, it's interesting to see automakers working to make filming easier. Scroll down to read the full announcement.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.