2021 Bmw X7 Xdrive40i on 2040-cars

Auto blog

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

BMW i8 Spyder gets production nod

BMW could be poised to expand its i8 range, beyond the hardtop version of the plug-in hybrid supercar. A report from Bimmerpost is claiming that the i8 Spyder, which we showed you in concept form at the 2012 Beijing Motor Show, will be heading to production.
The website claims the open-roof fuel-sipper was shown to BMW management last Friday as a production-intent model. Other than that, there's not a lot to tell here. The i8 Spyder should feature all the same mechanical and aesthetic features found on the i8 Coupe, just without the confining nature of a roof. It's unclear when we'll see a production i8 droptop make its debut, although this certainly strikes us as the kind of car that should arrive at the Geneva Motor Show.
While an i8 Spyder does seem like a logical leap for BMW's i sub-brand, we're going to keep this one filed under the rumors category until we hear more.