Loaded Warranty Tech Sport Premium Cold Weather Pkg 3 Rear Seats Navigation on 2040-cars

Auto blog

Can the government mechanically force you to wear your seatbelt? [w/poll]

The National Highway Traffic Administration is considering the use of ignition interlocks in vehicles that would require the seatbelts of occupied seats to be fastened in order to drive the car, Automotive News reports, four decades after Congress moved to prevent manufacturers from installing them in cars sold in the US market. Following a transportation bill passed last year that lift some of the restrictions on seatbelt interlocks, automakers such as BMW are considering the benefits of using them in future cars. Now, before you go crying about your lost freedom, keep reading.
BMW said in an October 2012 petition that the use of seatbelt interlocks would allow the company to make lighter and more spacious vehicles, if the devices could be used in lieu of unbelted crash tests. The crash test has required the addition of bulky safety features, such as knee bolsters, that aren't as necessary when occupants are buckled up, especially when considering the dizzyng list of safety features that come standard on today's cars. Europe, which has a higher rate of seatbelt use than in the US, doesn't perform unbelted crash tests on cars sold there.

BMW discussing supercar collaboration with McLaren

BMW is reportedly considering a new halo supercar. But rather than go it alone, word has it that the Bavarian automaker is discussing a potential partnership with McLaren to make the idea a reality. This according to Britain's Car magazine, which suggests that negotiations are well underway. The proposal would see the BMW supercar based on the same architecture that will to underpin Woking's P16 project that's set to replace current 650S. Rather than use the 3.8-liter twin-turbo V8 that McLaren developed together with Ricardo, the Bimmer version would use Munich's own engine: a 4.0-liter V8 with quad turbochargers – two conventional spools and two more electrically driven chargers. Their combined effect would net an expected 750 horsepower. Further differentiations on McLaren's carbon monocoque architecture for use in the BMW would include custom bodywork, aerodynamics, and interior fitments to include a unique instrument panel. Production, however, would be handled at the McLaren Production Centre in Woking, to the tune of several hundred units per year. The project would take the place of several aborted programs undertaken internally at BMW. One called for an entirely unique supercar developed in-house, referred to internally as the M100. When that project was aborted so that BMW could concentrate on the i sub-brand, BMW's own skunkworks shifted its focus to developing a more performance-focused version of the i8, known by some as the i8 CSi. When that project was canned as well, discussions with McLaren commenced. It wouldn't be the first time BMW would outsource development of its own supercar, or even the first time BMW would collaborate with McLaren on such a project. Initial development work on the original M1 in the 1970s was undertaken by Lamborghini before being taken in-house. And, of course, BMW provided the engine for the legendary McLaren F1. Meanwhile McLaren performed a similar function for Mercedes-Benz with the SLR, demonstrating Woking's experience in building flagship supercars for German automakers. This latest project could suffer the same fate as the M100 and i8 CSi programs. But if it is approved, it could yield both coupe and convertible versions, with the first slated to surface at the Frankfurt Motor Show in 2017 and reach dealerships in 2019.

As BMW i3 US launch nears, more details discovered

Think of the BMW i3's gas-powered range-extender as akin to driving around with a middle linebacker in the back seat. Except that football player will have a hard time pushing the car 60 miles or so once the battery runs out. Thankfully, he won't prevent you from getting a nifty tax credit either, according to BMWBlog, which isn't affiliated with the company. The i3's front storage compartment is not watertight. Here in the US, where the i3 will be available in short order, BMW will offer an optional i3 plug-in vehicle with a range extender that will have a 1.9-gallon capacity gas tank. That sounds a good deal smaller than the 2.4-gallon tank used in Europe, but the two are actually the same, the US tank is simply limited to the smaller size, Dave Buchko, from BMW's product and technology communications department, told AutoblogGreen. The complete range extender system – including the tank, the engine, and all related hardware – adds about 265 pounds to the 2,634-pound curb weight of the i3 EV and the extra weight in turn adds about a second to the EV's 0-to-60 time of seven seconds flat. Adding the range-extender won't make the US government take any longer to dole out a $7,500 tax credit for the i3, though. We also learned that the i3's front storage compartment is not watertight since it is only meant to hold the mobility kit and the 110-volt charging cord. BMW recently increased its production of the i3 at its German factory from around 70 units a day to about 100 due to better-than-expected demand. Check out our First Drive impressions of the model here.