2023 Bmw X5 Xdrive40i Sports Activity Vehicle on 2040-cars

Auto blog

BMW reveals M4 safety car with innovating water injection system [w/video]

Racing series don't just pick their safety cars at random, or use just whatever car is lying around. These days the car that sets the pace at the front of the pack is typically provided through consideration by a sponsor. In the MotoGP series, that's BMW and its M division, which have served up the Official Car of MotoGP since 1999. What you're looking at is the latest, and it packs some innovative technology on board. Aside from the matte black wrap with BMW's iconic striped livery, upgraded aero kit, retrofitted interior and emergency equipment, this BMW M4 coupe packs a new injection system under the hood. Only instead of injecting fuel, it injects water into the combustion chamber – something that wouldn't usually be recommended, but BMW insists actually aids in the combustion process. The idea is that the temperature of the air being mixed with the fuel inside the engine is usually hotter than ideal, so the system injects a fine mist of water into the collector in order to reduce the air's temperature... sort of like one of those hydrating misters at an amusement park or outdoor mall, but in an even hotter environment. The system brings the temperature of the air down to a more optimal temperature, helping it combust better. The process is said to yield a number of positive effects. For one, it reduces knocking. For another, it can make more out of lower-octane fuel where higher octane isn't available. It also can control the adverse effects of higher ambient temperature on the combustion process. But most of all, it increases output and reduce fuel consumption by around eight percent. Whether that eight percent is worth the added weight of the system – particularly with water pump and a 1.3-gallon tank in the trunk – is up for debate. But we'd imagine that the Bavarian engineers have weighed very carefully. Of course there's also the matter of refilling the water tank, which BMW says would be carried out whenever the safety car is refueled, but in real-world conditions would only necessitate attention once every five top-ups at the gas station. By now you might have guessed that BMW probably didn't develop this system just for the MotoGP safety car, and isn't planning on keeping it confined to the racetrack. Instead it's being tested and demonstrated on the safety car before being rolled out on production models in the future.

BMW i8 Spyder gets production nod

BMW could be poised to expand its i8 range, beyond the hardtop version of the plug-in hybrid supercar. A report from Bimmerpost is claiming that the i8 Spyder, which we showed you in concept form at the 2012 Beijing Motor Show, will be heading to production.
The website claims the open-roof fuel-sipper was shown to BMW management last Friday as a production-intent model. Other than that, there's not a lot to tell here. The i8 Spyder should feature all the same mechanical and aesthetic features found on the i8 Coupe, just without the confining nature of a roof. It's unclear when we'll see a production i8 droptop make its debut, although this certainly strikes us as the kind of car that should arrive at the Geneva Motor Show.
While an i8 Spyder does seem like a logical leap for BMW's i sub-brand, we're going to keep this one filed under the rumors category until we hear more.

18,000 BMW models recalled for potential fuel pump failure

BMW will be recalling over 18,000 vehicles from the 2, 3 and 4 Series families, including vehicles from model years 2014 and 2015, due to potentially bad fuel pumps. The full roster of vehicles includes four- and six-cylinder models of all hardtop 2 Series models, rear-, all-wheel-drive and Gran Turismo versions of the 3 Series, and coupe, convertible, Gran Coupe, rear- and all-wheel-drive 4 Series models. The 3 Series ActiveHybrid is also included in the recall, although the 3 Series diesel line has been left alone. According to the bulletin from the National Highway Traffic Safety Administration, "improper" nickel plating on some of the parts could lead to a failure of the fuel pump, leading to a stall situation. BMW is planning to notify owners and will begin replacing the fuel pumps of affected vehicles at the end of the month. Scroll down for the official NHTSA bulletin, which includes a complete breakdown of individual models affected by the recall. Related Video: Report Receipt Date: MAR 31, 2015 NHTSA Campaign Number: 15V189000 Component(s): FUEL SYSTEM, GASOLINE Potential Number of Units Affected: 18,054 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing. CONSEQUENCE: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the fuel pump, free of charge. The recall is expected to begin April 30, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.