2008 Bmw X5 4.8l V8 32v Automatic Awd Suv Premium Backup Camera Leather Blue on 2040-cars

Auto blog

BMW plugs in new X5 xDrive40e PHEV crossover

BMW broke with its own convention when it rolled out the original X5 back in 1999, and did it again when it launched the i3 and i8 plug-in hybrids in 2013. Now it's bringing the two together with the reveal of the new X5 xDrive40e. Based on the third-generation F15 model and previewed by the X5 eDrive concept at the 2013 Frankfurt Motor Show, the X5 xDrive40e is the first PHEV from the core BMW brand. Its hybrid powertrain pairs a 2.0-liter turbo four (itself good for 245 horsepower and 258 pound-feet of torque) to an electric motor integrated into the eight-speed automatic transmission (contributing another 113 hp and 184 lb-ft) for a total combined output of 313 hp and 332 lb-ft. That makes it more powerful by both counts than the six-cylinder X5 xDrive35i (though considerably less so than the V8-powered xDrive50i), giving it a quoted 0-62 time of 6.8 seconds and an electronically limited top speed of 130 mph. But it can travel up to 19 miles on electric power alone, at which top speed is limited to 75 mph. BMW has mounted the 9-kWh lithium-ion battery pack underneath the luggage floor, limiting cargo capacity to between 17.65 and 60.7 cubic feet, depending on how you set up the rear seats. An adaptive suspension keeps it all on an even keel, with power transmitted to all four wheels through a permanent all-wheel-drive system. An M model it is not, but the Bavarian automaker will offer it with an M Sport package. Full details on pricing and availability have yet to be announced, but the X5 xDrive40e is set to hit European dealers in the fall. The BMW X5 xDrive40e The first plug-in hybrid production car from the BMW core brand is a Sports Activity Vehicle. Permanent all-wheel drive and the BMW EfficientDynamics eDrive technology endow the BMW X5 xDrive40e with sensational sportiness and supreme poise on the one hand and outstanding efficiency on the other. With a total system output of 230 kW/313 hp generated by a four-cylinder petrol engine with BMW TwinPower Turbo technology and a synchronous electric motor, the BMW X5 xDrive40e achieves a combined fuel consumption of 3.4 – 3.3 litres per 100 kilometres (83.1 – 85.6 mpg imp) and a combined electricity consumption of 15.4 – 15.3 kWh over the same distance. CO2 emissions come in at 78 – 77 grams per kilometre (figures according to EU test cycle for plug-in hybrid vehicles, may vary depending on the tyre format specified).

Next BMW X1 moving to smaller, lighter FWD-biased platform

BMW's decision to make the upcoming 2-Series Active Tourer front-wheel drive has been polarizing to say the least, but like it or not, that is the direction the company will go in the near future - one rumor put the number as high as 23 front-wheel-drive models for Mini and BMW combined. The next-generation X1 won't send all its power to the front wheels, though, when it launches in early 2016. While it will use the same platform as the Active Tourer, rumors suggest all models will use all-wheel drive - at least at launch.
A "high-ranking," unnamed BMW manager confirmed to AutoWeek that the new model will switch to transversely-mounted three- and four-cylinder engines and the same six-speed manual and eight-speed automatic transmissions as the Active Tourer. The new, smaller platform will allow for more efficient packaging, and despite the smaller size, interior space will remain comparable. All the changes should make it significantly lighter too.
Don't start wailing just yet because BMW surely won't be entirely abandoning sporty models. AutoWeek claims that the Bavarians are working on a higher-output version of the 2.0-liter turbocharged four-cylinder with power closer to 300 horsepower, about a 72-hp boost. It's also rumored to offer a sporty version of the X1 that may be called the X2.

BMW i3 called 'most revolutionary car' since Ford Model T

The Ultimate Driving Machine, or at least one of them, may also be the Ultimate Engineering Success. Consultant Munro & Associates, which specializes in automotive tear-down analysis, pretty much said as much when taking an under-the-skin look at the BMW i3 plug-in. In short, the firm liked what it saw. Presenting at Detroit's Plastic's in Automotive conference this week, Munro CEO Sandy Munro called BMW's first mast-produced plug-in model the most revolutionary car "since Henry Ford's Model T." The car earned big points for its substantial uses of materials that are both lightweight (key for any plug-in's range) and recyclable. BMW has touted these advantages all along. In late 2013, the German automaker went as far as saying its use of carbon fiber reinforced plastic (CFRP) would reduce customer costs related to both repair and insurance. The i3 went on sale in the US last May and, by the end of the year, moved more than 6,000 units here. It sold almost 17,800 The i3 last November also was named the Green Car of the Year at the Los Angeles Auto Show, beating out models such as the compressed-natural-gas-powered Chevrolet Impala B-Fuel and the Audi A3 TDI diesel. Munro made news earlier this week when it offered a free i3 for anyone who bought the master- or OEM-level version of the report, though the report isn't cheap and that offered disappeared once Munro made his presentation. Check out Munro & Associates' press release below. Munro Discusses Groundbreaking Technology Finds from BMW i3 Teardown at Plastics in Automotive Conference; Offers New BMW i3 for Purchasers of Master-level Report DETROIT, Jan. 14, 2015 /PRNewswire/ -- During today's Plastics in Automotive Conference in Detroit, Sandy Munro, CEO of Munro & Associates, Inc., discussed – for the first time publicly – his consulting firm's findings from its extensive deep-dive teardown, costing and benchmark study of the BMW i3 urban electric car. During his presentation, "Deconstructing the BMW i3: Groundbreaking Technology and the Composite Car," Munro discussed the carbon fiber life module, polymer components, recyclability and safety of what he considers to be "the most revolutionary car in terms of creative engineering and manufacturing since Henry Ford's Model T." During the presentation, Munro focused on four crucial aspects of the BMW i3: the manufacturing of its carbon fiber life module; its polymer components; recyclability; and safety.