2002 Bmw X5 3.0i Sport Utility 4-door 3.0l on 2040-cars

Auto blog

BMW Concept Active Tourer Outdoor enjoys a day in the sun

This BMW Concept Active Tourer has evolved for the nature and cycling set and premiered at OutDoor Friedrichshafen, a trade fair in held this month in Germany. The sturdy wagon is tweaked with new materials, accessories and ConnectedDrive features for those who do a lot of their living under the sky as opposed to inside their cars.
Under the hood is the same plug-in hybrid drive system we've were introduced to in 2012, featuring a transversely-mounted, 1.5-liter turbocharged three-cylinder engine paired with an electric motor and a battery pack under the rear compartment floor. Total output is 190 horsepower and 147 pound-feet of torque headed to the front wheels, a claimed time from zero to 62 of under eight seconds, a pure electric range of up to 19 miles, a top speed of 124 miles per hour and claimed fuel economy of around 95 US miles per gallon.
The space behind the rear seats is the showcase, with a transformable compartment that can stow two bikes on built-in, retractable carriers. Remove the front wheel and seat from the bikes, then the frames can be locked into place using two rails and brackets. The wheels can be stowed in a holder attached to the right rear seat, the saddles can go into a compartment in the load floor. If you need to make a quick adjustment or a fix, you can do so since the bikes are aligned across the load bay.

BMW brings first diesel 7 Series to US with $82,500* 740Ld xDrive

After almost 40 years on the market, there are probably few things the BMW 7 Series hasn't offered, but when it comes to the US market, one of those things just happens to be a diesel engine. That is all about to change, however, as BMW announced that it will unveil the 2014 740Ld xDrive at the Chicago Auto Show before sales commence later in the spring.
Offered only on long-wheelbase models with standard all-wheel drive, the new diesel 7 is powered by BMW's 3.0-liter inline-six producing 255 horsepower and a stout 413 pound-feet of torque peaking between 1,500 and 3,000 rpm. While BMW has yet to release any type of fuel economy figures, it did say that its diesel technology is usually good for an improvement of 25 to 30 percent over the gas models - just for fun, that means that the 740 Ld xDrive could get as much as 24.7 miles per gallon in the city and 36.4 mpg on the highway, but that's just doing the math and there is nothing official behind those numbers. Acceleration will take a little longer than in the 740Li xDrive (shown above) with BMW stating 6.1 seconds from 0-60 compared to 5.4 seconds for the gas model.
Another small increase over the gas version will be in price, with the 740Ld xDrive getting a starting MSRP of $82,500 (*not including $925 for destination), which is just a $1,500 bump over the 740Li xDrive. For comparison, the Audi A8L TDI starts at $78,800, while the previous-gen Mercedes S350 Bluetec was priced at $93,000. Scroll down for more info on the new diesel-powered 7 Series, and stay tuned to our live coverage from Chicago in a couple weeks as we'll have live images and hopefully more info.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.