Cpo Certified X3 28i Convenience Premium Reverse Cam Pdc Enhanced Bluetooth Awd on 2040-cars

Auto blog

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

Creative minds build lightweight Lambos and Bugattis with cardboard and pedals

As manufacturers continue their quests to reduce the weight of their vehicles, they switch out heavy steel for lighter materials such as aluminum, carbon fiber, titanium, and sometimes even magnesium. But they've been ignoring a cheap alternative that is widely available: cardboard. Leave it to two visionaries from Vietnam to crack the code and build supercars and superbikes out of the versatile paper product. Vietnamese YouTube channel NHET TV, via CarScoops, might only have a year under its belt, but in that short amount of time, it has amassed more than 350,000 subscribers. What initially started out as a random collection of harmless pranks, trolls, and makeshift time-killers has blossomed into an entertaining channel of ultra-low-budget car and motorcycle builds.  The first video posted is a paper plane competition, but the second video shows the first appearance of a vehicle, a Ducati Panigale made out of cardboard and a bicycle. This isn't like Paper Mario with a two-dimensional silhouette, it's a close-enough three-dimensional replica. That project was admittedly pretty rough, but the work has only improved as the channel has matured.  Throughout the past year, NHET TV has stuck with high-performance transportation for inspiration. They've built projects that mimic a Lamborghini Sian, a Lamborghini Aventador SVJ, a Ferrari LaFerrari FXX K, a Bugatti Chiron, a BMW S 1000 RR, and a Yamaha YZF-R6, among others. Some of the builds, such as the Bugatti, go beyond the typical cardboard-body-on-bicycle-frame. As seen in the video below, the NHET TV built a tubular frame for the car using spare bike parts that they welded together. The Bug even has a custom steering column and steering wheel, though the high-quality model continues to use bike chains and pedals for power. The SVJ might be the most advanced vehicle, as it has a real engine for power and has custom reverse gearing. These guys are creating fun out of the limited resources they do have, and that's what right now is all about. Enjoy the videos below and watch more on the full NHET TV channel.

New BMW i3-like Visio.M EV concept uses lightweight resin

It's not a new version of the BMW i3, but an updated version of a lightweight concept car from SABIC, BMW, the Technical University of Munich, Daimler and others does bear a certain resemblance to the well-designed plug-in city car. From the black "glass" in the hatch to the angled line tail lights to the up-and-down window line, you can see a sort of family resemblance (see an i3 comparison photo here). And, of course, they both have an electric powertrain. But the changes made to the new lightweight urban electric concept vehicle is more of an exercise in what's possible rather than a way to evolve the i3 and i8 into a broader i family of vehicles. Even so, what we see here is interesting, since SABIC found all sorts of new ways to take weight out of the car as part of the Visio.M (Visionary Mobility) project, which was first announced in 2012. Let's start with the window material, which as you might guess from the quotation marks above, is not made of glass but is instead SABIC's Lexan polycarbonate (PC) resin plastic. The lower weight (the PC helps shed about 29 pounds) adds two miles of range while the PC resin has better thermal conductivity compared to glass and so does even more because the HVAC system can be more efficient. According to SABIC's computational fluid dynamics analysis, an extra 9-10 miles of range, in fact. Without the battery, this concept weighs just 992 pounds. Remember, BMW already made a lot of weight-reduction measures in the i3 thanks to carbon fiber reinforced plastic, so to make the "glass" lighter would only help boost efficiencies on a production vehicle that uses a resin like this. Read more below. SABIC's LEXAN™ resin delivers weight savings and thermal efficiency for new ultra-lightweight electric car concept developed by BMW-led Visio.M Consortium Munich, October 20, 2014 Today, at the Technical University of Munich (TUM), BMW, Daimler, TUM scientists and a consortium of industry participants showcased a lightweight urban electric concept vehicle with various advances, including an all-plastic design of the car's windows. The windows are made of LEXAN resin, a polycarbonate (PC) material, and coating technologies from SABIC, a leading developer of PC glazing for automotive windows and many other thermoplastic solutions for the automotive industry.