2014 Xdrive28i New Turbo 2l I4 16v All-wheel Drive Suv Moonroof Premium on 2040-cars

Auto blog

The Homer to contest 24 Hours of LeMons

It's finally happened. A 24 Hours of LeMons team has built the definitive interpretation of The Homer from The Simpsons for competition in an upcoming race. As you may recollect, The Homer is the fictional car designed by Homer Simpson for his brother's car company. Designed with a separate compartment for screaming children and other Homer-centric goodies, the animated machine bankrupted its parent company and put Homer's brother out of a job. Now we get to watch it race other crap cans as it tackles Southern California's Buttonwillow Raceway on June 29. Scott Chamberlain, Kris Linquist, Reid Conti, Ben Reilly and Mike Yepes will helm the machine, and Jeff Herman serves as the team's creative director.
The racer is the latest incarnation of a well-abused BMW 3 Series. The team campaigned the same E30 under the "Prickstine" banner as a Chrysler Imperial tribute and "Porcubimmer," the latter being a riff on the ever-popular joke about the difference between porcupines and BMW models. Never gets old. You can check out a video of the finished Homer below, and be sure to like the team on Facebook to see updates from the race. Now, about that Canyonero...

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

BMW previews new M6 GT3 racing prototype [UPDATE]

UPDATE: A previous version of this post specified the incorrect weight target for the M6 GT3. The text below has been updated with the correct information. BMW may not compete at the top level at Le Mans or in the World Rally Championship, it may have withdrawn from Formula One and shuttered the Formula BMW series, but it's not without its racing programs. Aside from the Minis that dominate the Dakar Rally, BMW fields the M4 in DTM, the M235i Racing in the BMW Sports Trophy and the Z4 in GT3 competitions around the world. But now it's preparing to launch a new GT3 racer based on the M6. Currently undergoing development, BMW has presented its new M6 GT3 prototype at its factory in Dingolfing, Germany. Based on the road-going M6 coupe, the GT3 retains its 4.4-liter twin-turbo V8 engine with dry-sump lubrication, producing over 500 horsepower – which is actually less than the road-going model you can buy, but has to be restricted to meet FIA certification. At less than 3,000 pounds, it is a fair bit lighter than the production version, and promises to deliver blistering performance figures to whichever privateer teams buy one to enter in racing series around the world. The M6 GT3 is slated to hit the circuits next year, when it will join the lineup alongside the M6 coupe, M6 convertible and M6 Gran Coupe, to say nothing of the M6 safety car used in MotoGP. In a related development, BMW Blog reports that the Bavarian automaker is probing potential interest in bringing the M235i Racing to North America. The entry-level model in the BMW Motorsports range, the M235i Racing sells in Europe for the equivalent of $68,000. The next milestone: the BMW M6 GT3 is rolled out at the BMW premises in Dingolfing. 05.02.2015 Munich (DE), 5th February 2015. BMW's new figurehead for the GT racing scene has been given its first run: last Saturday, the test track on the premises of the BMW factory in Dingolfing (DE) provided the stage for the roll-out of the BMW M6 GT3, with which BMW teams will compete in national and international series, as well as at iconic endurance races, from 2016 onwards. The car left the garage for the first time at precisely 14:00 with Jorg Muller (DE) at the wheel. This gave the BMW works driver the honour of creating the next milestone in the development of the BMW M6 GT3. "This is a big moment for everyone who has worked so intensely and passionately on the development of the BMW M6 GT3 in recent months," said BMW Motorsport Director Jens Marquardt.