2013 Bmw M3 Cpe-competition Pack-enhanced Sound-htd Seat-like 2012 on 2040-cars

Auto blog

Hamann BMW M6 Mirror can now cash the checks its body writes

Anyone remember the Hamann Mirror? Need a refresher? The Mirror is German tuning company Hamann's idea of a BMW M6. It was shown at the 2013 Frankfurt Motor Show as an M6 Gran Coupe, sporting a ridiculous paint job and some meaty, multi-spoke 21-inch wheels.
Consider this car the Mirror Mark 2. Based on the M6 Coupe, Hamann has applied a similar visual theme, using the same 21-inch wheels from 2013. Whereas the Gran Coupe rode around with a stock powertrain, though, there's been no such restraint with the two-door Mirror. A fine 620 horsepower is available from the 4.4-liter, biturbocharged V8, an increase of 60 horsepower. Torque is up as well, from 501 pound-feet to a whopping 560, meaning this M6 has speed to match its looks. Hamann claims the Mirror's newfound grunt allows it to hit 62 miles per hour faster than the standard M6 (we'd certainly hope so), although it won't mention a specific number.
The suspension, meanwhile, has been dropped 1.37 inches, or about a third of an inch lower than the Frankfurt Mirror. That drop is complemented by the Mirror's bodywork, including the exposed, carbon fiber hood and the flared fenders, which can now accommodate the enormous 305/25 rear rubber. Hamann has also paid some attention to the front and rear aerodynamics.

BMW to offer carbon fiber wheels in a year or two

The Citroën SM sat on the first set of production glass fiber and resin wheels in 1972 when parent company Michelin developed the exotic hoops in order to take the SM rallying. It wasn't until 2008 that we got the first all-carbon-fiber wheel for passenger cars in the form of a prototype model from Weds Sports in Japan that remained a prototype. Australian company Carbon Revolution followed that a year later with its CR-9 all-CF wheel, first introduced on the Shelby Ultimate Aero and now available for independent purchase for about $15,000 per set. BMW could be the first OEM to offer entire wheels in carbon fiber reinforced plastic in two years.
The wheels - either all-CFRP or using a CFRP rim and alloy spokes - were shown off during BMW's Innovation Days in Munich and are products of the development work done on its i-branded cars. The full-CFRP wheel is 35-percent lighter than a forged alloy wheel, the hybrid alloy and CFRP wheel is 25-percent lighter, making for a decent drop in unsprung rotating weight. As demonstrators during a tech day the wheels aren't yet in the pipeline for production and EU approval, but an article in Auto Express claims that they could be on the market as soon as two years from now.
Other possible parts include a full carbon fiber steering wheel and propeller shaft, the latter of which is coming as a single-piece component on the new M3 and M4. BMW is also talking up its use of secondary carbon fiber - waste material from i3 and i8 production - that can be used for items like IP support structures, seat frames and spare wheels in place of traditional metals like aluminum and magnesium. There's an excerpt of the Innovation Day press release below with more details.

Rinspeed issues its Budii call for Geneva [w/video]

Of all the concepts prepared every year for the Geneva Motor Show, those made by Rinspeed are typically the most outlandish and forward-thinking. And this is the latest from Frank Rinderknecht and company. Though Rinspeed's been known to build entirely original vehicles from the ground up, it tends to base its creations on production models: Following the Tesla-based XchangE from last year, the Smart-based Dock+Go of 2012, the Fiat-based E2 from 2009 and the Lotus-based sQuba in 2007, the new Budii concept is based on the BMW i3. That means, of course, that it's powered by electricity, but the technology demonstrator is focused more on autonomous driving tech. The Budii incorporates a periscopic camera and laser scanner to map the terrain and the road ahead from above, and a drive-by-wire steering system that allows the steering wheel on an articulated column to be passed between driver and passenger or tucked out of the way to let the electronics take over. Once unburdened of the task of driving, the occupants can enjoy the proliferation of touchscreens, the "wellness shower" (whatever that is) installed in the headliner, the automatic watch-winder on the steering column and the interior accoutrements furnished by Mansory. The whole thing rides on a lowered suspension with 19-inch Borbet alloys, with a rainbow Knight Rider-style grille in the nose. But to appreciate the full scope of the consortium of suppliers that collaborated with Rinspeed to bring the Budii to life, you'll want to delve into the press release after the video below and scope out the dozens of high-resolution images in the slideshow above. 2015 Geneva Motor Show: Rinspeed "Budii" redefines human-machine interaction Reach out to robots The vision of autonomous driving will soon become reality and will fundamentally change the interaction of man and automobiles. While the research centers of the automotive industry are still feverishly working on the technical solutions, progressive thinkers such as the Swiss idea factory Rinspeed are already giving concrete thought to how automated private transport will transform the car and the man-machine system. Besides fundamental conceptual changes, this will also have to involve issues of ethics and society. In the past, the robots in the factories of this world merely assembled cars for people. In the new "Budii" concept car from Swiss automotive visionary Frank M.