2006 Bmw Sport on 2040-cars

Auto blog

BMW recalling 40k+ motorcycles to replace rear wheel flange

A problem with the rear wheels on a wide array of its motorcycles has prompted BMW and the National Highway Traffic Safety Administration to issue a recall for 43,426 vehicles. In the affected units, the mounting flange on the rear wheel is at risk of cracking if the bolts are over-tightened. If that flange cracks, "the rear wheel may not remain secured to the motorcycle," which is kind of important considering there are only two wheels on a motorcycle to start with. The recall affects certain model-year 1200 and 1300 models – including the R1200GS, R1200RT, R1200GS, R1200R, R1200S, R1200ST, K1200S, K1200R, K1200R Sport, K1200GT, K1300S, K1300R and K1300GT – as well as the HP2 Megamoto, HP2 Enduro and HP2 Sport. Owners of the affects units can expect to head from the manufacturer to arrange having the aluminum flange replaced with a steel one. Related Video: RECALL Subject : Rear Wheel Mounting Flange may Crack Report Receipt Date: MAR 11, 2015 NHTSA Campaign Number: 15V141000 Component(s): WHEELS Potential Number of Units Affected: 43,426 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. CONSEQUENCE: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall is expected to begin April 21, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery BMW HP2 Sport View 13 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: BMW Recalls BMW Motorcycle bmw motorrad

Two rare Alpina BMWs given the Petrolicious treatment

Alpina is getting more and more ink because of because of that rolling cannonade known as the B7 and its closer ties with BMW. The company's tuning business dates to 1962 when Burkard Bovensiepen began fiddling with Weber carburetors, then his company began racing in 1968 and was eventually certified as an automaker in 1983.
Two of its rarer specimens from those early years have gotten a glance from the folks at Petrolicious: the E24 B10 and E24 B7S. Based on the BMW 6 Series, the Alpina versions made one of the most special coupes from the Eighties even more so. According to the video, there were only 44 B10s made, and the turbocharged, 333-horsepower B7S - this was in a luxury coupe in 1982, mind you - saw only 33 examples produced.
You won't be sorry to find out more about them - and see how they run - in the Petrolicious video below.

BMW M boss denies supercar collaboration with McLaren

The first time there was a McLaren Honda Formula 1 team, McLaren did some moonlighting with BMW on a supercar for all time, the F1. It just so happens that McLaren Honda is a thing again, and Car magazine recently ran a piece saying McLaren and BMW would get back together on another hopped-up coupe with roughly the same working agreement as before: BMW supplies a screaming V8, McLaren builds the body to go around it. Only this time the car would be a BMW model, not a McLaren, and be BMW's version of the next-generation McLaren 650S. The Car piece said that BMW head of R&D Klaus Frolich first got in touch with McLaren nine months ago, however, the head of BMW's M division, Frank van Meel, said he doesn't know anything about it. Mentioning every BMW exec referred to in the story, van Meel told Australia's Motoring, "I haven't had a phone call, [CEO] Harald Kruger hasn't had a phone call, and Klaus Frohlich hasn't had a phone call." The Car story said the reason BMW hasn't done a conventionally powered exotic recently is that former CEO Norbert Reithofer didn't want anything to eclipse the i8, the i brand, and the eco credentials the brand is charged with promoting. Changes in the executive suite – new CEO, new M boss, new R&D chief – were thought to meant changes in approach. Not according to van Meel, who gave those same i brand reasons to Motoring as then reasons BMW has no interest in a 750-horsepower, quad-turbo coupe. On top of that, after spending billions to move the game forward with in-house carbon fiber technology, van Meel asked, "I don't understand why we would need to work with McLaren for a supercar anyway. All of the technologies the story suggested are technologies that are core competences here at BMW and at M. Nobody in the world is more advanced with carbon-fibre than we are." The extent of the denial is so detailed that we're inclined to believe BMW on this one; cover stories usually stop at curt phrases like "We have no knowledge of that" or "We don't comment on future product." So you can put away your dreams of a McLaren F1 Part Two. For now. Related Video: