Leather 6 Cyl Sport Rims Cd Player Sunroof Cold Ac Must See on 2040-cars

Auto blog

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

BMW Concept X5 eDrive plug-in hybrid headed to Frankfurt

With six confirmed public debuts scheduled for the upcoming Frankfurt Motor Show, BMW is definitely going to have its hands full. While we've already driven models like the 4 Series and the i3, one of the more interesting introductions is a "concept" plug-in hybrid version of the new F15 BMW X5 called the BMW Concept X5 eDrive.
As the second concept to wear the eDrive name, this X5 combines a 95-horsepower electric motor with a turbocharged four-cylinder engine to balance performance and efficiency. On the green side of things, BMW says that the eDrive system allows the X5 to reach speeds of 75 miles per hour and a range of 19 miles (although we're guessing not at the same time) under electric power only, to go with fuel consumption of about 62 miles per gallon US (3.8 liters per 100 kilometers). For performance, this plug-in can still accelerate from 0-60 in under seven seconds, and drivers can select from three PHEV modes: one that operates the system automatically, an all-electric mode and a Save Battery mode to preserve the battery's current state of charge.
Aside from the obvious plug port on the left front fender, the X5 eDrive is differentiated from the 2014 X5 with slightly restyled front and rear fascias, subtle blue accents tying in with the BMW i line and lightweight, aero-tuned 21-inch alloy wheels. There is no definitive word on whether the Concept X5 eDrive will make it to production, but judging by BMW's recent commitment to plug-in vehicles, we wouldn't be surprised to see an X5 PHEV on the roads within the next couple of years. We'll see the Concept X5 in just a few weeks in Frankfurt, but until then, scroll down for the official press release.