2004 Bmw 545i Low Miles Clean Car Fax Navigation Loaded We Finance! on 2040-cars

Auto blog

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.

BMW offers M Performance Power Kit for 2012 335i sedan

BMW has let loose a new M Performance Power Kit for its F30-generation 335i and 335i xDrive sedans. Starting at $1,100 for the kit - installation is extra - your car will be fitted with a new ECU and air intake on the functional side and an M Performance engine cover and rocker panel stickers on the decorative side. The Power Kit raises the 3.0-liter inline six-cylinder's horsepower rating from 300 to 320, and on automatic models, torque gets a boost from 300 pound-feet to 332 lb-ft - manual transmission models get a smaller bump to 317 lb-ft.
According to the Bavarian automaker, you'll be able to hear the change in the overrun exhaust note, and 0-60 mile-per-hour times drop by 0.2 seconds. The package is available now at all BMW Centers in the US, and if you get it installed when you purchase the car new, it will get the same four-year, 50,000-mile warranty as the vehicle. Have it done after the fact and the kit will be warranted for two years and unlimited miles. There's a press release below with some more details.

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.