1992 Bmw 525i Base Sedan 4-door 2.5l on 2040-cars

Auto blog

Looking back at 84 years of BMW roadsters

Today BMW is a top player in the luxury vehicle market, but it wasn't always so. With origins as an airplane engine builder early in the 20th Century, it broke into the automotive industry when it bought Automobilwerk Eisenach in 1928. That German manufacturer was licensed to build the Austin Seven under the name Dixi DA-1, which could be had in a roadster body style. In 1929, BMW dropped the Dixi name, and by 1936, it was building a car it designed in-house, the 326 sedan. That was followed by the company's first roadster of its own design, the swoopy two-door 327 of 1937.
XCAR picks up there, and gives a history of BMW's iconic roadsters starting with the 327, ending with today's Z4, and covering everything in between - including the beautiful post-war 507 of 1957 and the funky, plastic-bodied 1989 Z1.
The video, which we've included below, is a good history lesson and a great chance to see a bunch of classic BMWs, spanning 84 years, all driven back to back within the safe confines of a racetrack. When you have a spare 20 minutes, go ahead and take some time to watch it.

BMW unveils 2016 X5 M and X6 M super CUVs

The second-generation BMW X5 M and X6 M have officially made their arrival for the speed-obsessed, crossover-loving masses that aren't willing to turn to Mercedes-AMG or Land Rover Special Operations.
While the new models retain their 4.4-liter, twin-turbocharged V8s, power has increased from 555 horsepower to 567 ponies. Torque is up more significantly, climbing from 500 pound-feet to 553 pound-feet. The extra twist is slightly less accessible, with peak grunt arriving between 2,200 and 5,000 rpm, rather than the earlier model's 1,500 to 5,650. Still, we'll take the ten percent increase in torque as a net win.
The big powertrain switch sees the old X5/6 M's six-speed automatic replaced with an eight-speed Steptronic transmission from BMW M. This new gearbox feeds power to an xDrive all-wheel-drive system that can variably shuffle up to 100 percent of power to either axle. In conjunction with the force-induced thumper under the hood, this powertrain arrangement allows both M models to hit 60 miles per hour in just four seconds. That's a mightily impressive stat in a 5,000-plus-pound vehicle.

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.