2005 Audi S4 Sedan 4-door 4.2l, 58k Miles, With Stoptech Big Brake Kit on 2040-cars

Auto blog

Audi SQ5 TDI Plus packs more potent punch

While the SQ5 that Audi offers in North America packs a supercharged 3.0-liter V6 burning gasoline, the version it sells back home is fueled by diesel. And now, with the Frankfurt Motor Show fast approaching, Ingolstadt is rolling out an even more potent version. The new Audi SQ5 TDI Plus upgrades on the existing version with 27 more horsepower and nearly 37 pound-feet more torque. The six-cylinder twin-turbo diesel engine now cranks out 340 hp and a mountainous 516 lb-ft. That's over a hundred torques more than even the V10 Plus version of the new R8. Burning that midnight oil will rocket the SQ5 TDI Plus to 62 from a standstill in 5.1 seconds and on to an electronically limited top speed of 155 miles per hour. All the while it will return the equivalent of 35.6 miles per gallon of diesel fuel. Compared to the gasoline version offered Stateside, the TDI Plus now produces nearly as much power but way more torque. Performance figures are now nearly identical, but the TDI Plus uses less of the (typically) cheaper fuel. The upgraded package also includes 21-inch five-spoke alloys, additional gloss black accents, restyling tailpipes, and revised interior trim. The launch of the SQ5 TDI Plus follows that of the S8 Plus performance sedan, which our sources tell us is likely – but as yet unconfirmed – to be offered in the United States. <p>Your browser does not support iframes.</p> Even more power and top-of-the-line equipment: The Audi SQ5 TDI plus with 250 kW (340 hp) - The SQ5 TDI plus will launch on the German market in October 2015 - 700 Nm of torque; from 0 to 100 km/h in 5.1 seconds - On request, exclusive equipment package from quattro GmbH Audi is further expanding its range of S models. In October, the new SQ5 TDI plus* will arrive at German dealerships with more power and driving pleasure and even more extensive equipment – with 250 kW (340 hp), sport differential and 21-inch wheels. Even in its basic version, the successful Audi SQ5 TDI* comes as an SUV with the performance of a sports car. The plus version has an even higher power output. The biturbo V6 TDI produces 250 kW (340 hp) from its three liters of displacement by way of increased injection pressure. This results in 20 kW/27 hp more power compared to the SQ5 TDI. Its peak torque is increased by 50 (36.9 lb-ft) to 700 Nm (516.3 lb-ft).

Honda, Audi sweep European tin-top championships

Despite his win at the Japanese Grand Prix this weekend, Sebastian Vettel still has another race or two to go before he can claim his fourth consecutive World Championship in Formula 1. Back in Europe, however, this weekend saw several championship titles decided in a variety of tin-top racing series.
In the British Touring Car Championship, Gordon Shedden won the final round at Brands Hatch this weekend, but that wasn't enough to defend his title. Instead, the ultimate glory went to Andrew Jordan, also driving a Honda Civic, coming in ninth place to take a seven-point victory over Shedden in the final standings. Little wonder then that Honda took the constructors' championship and the Honda Yuasa Racing team took the teams' title. Four-time BTCC champion and Fifth Gear co-host Jason Plato, now driving for MG, landed third in the standings.
While Honda dominated the British championship, it was Audi that reigned supreme in mainland Europe. In the Superstars International Series - Italy's touring-car championship - Gianni Morbidelli drove the Audi RS5 to his fifth title, finishing the season's final race in a calculated third place behind the BMW racecars of Giovanni Berton and Max Mugelli. It's the second consecutive win for the RS5 in the Superstars series (Johan Kristoffersson won the title last year), and the second this year following Mike Rockenfeller's title in the RS5 DTM.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.