07 Grey Quattro Sunroof Sat Radio Navigation Nav Heated Leather 6cd Memory Seats on 2040-cars

Auto blog

Audi rolls out new A6 L E-Tron hybrid for China

Audi is expanding its range of hybrid models with the introduction of the A6 L E-Tron at the Shanghai Motor Show. It's earmarked specifically for the Chinese market and is based on the long-wheelbase A6 L already produced there. The new E-Tron model marries a 2.0-liter turbo four good for 211 horsepower and 258 pound-feet of torque to an electric motor with 122 hp and 162 lb-ft integrated into the eight-speed automatic transmission. A lithium-ion battery pack provides 14.1 kWh power. Mounted in the trunk, it limits cargo capacity to 11.9 cubic feet. The system produces net output of 245 hp and 369 lb-ft – enough to send the long-wheelbase hybrid to 62 miles per hour in 8.4 seconds en route to a top speed of 130 mph. All the while, it'll return 106.9 miles per gallon by the Chinese standard, traveling over 30 miles on electric power alone (at speeds of up to 83.9 mph) and up to 546.8 miles without needing to stop. The A6 L E-Tron is one of three new hybrids Audi is showcasing in Shanghai this year, alongside the Q7 E-Tron and Prologue Allroad concept. Ingolstadt, 2015-04-16 The new Audi A6 L e-tron for China - First Audi plug-in hybrid model from Chinese production - Output of 180 kW (245 hp) with extremely low consumption - 50 km (31.1 mi) electric range and total range of 880 km (546.8 mi) With the A6 L e-tron, Audi is taking an important step toward even greater fuel efficiency in China. The sedan has been developed specifically for the Chinese market. Its plug-in hybrid drive with 180 kW (245 hp) provides for powerful performance. The model consumes on average just 2.2 liters of fuel per 100 kilometers (106.9 US mpg). After launching the e-tron era in China with the imported A3 Sportback e-tron* in 2015, Audi is taking the next step with the local production of the A6 L e-tron beginning in 2016. The model is based on the long version of the Audi A6, which is already built in China, and is configured as a highly efficient parallel hybrid, meaning that its two drives are arranged one directly behind the other. The 2.0 TFSI is a state-of-the-art, four-cylinder, gasoline engine producing 155 kW (211 hp) and 350 Nm (258.1 lb-ft) of torque. The disk-shaped electric motor provides 91 kW and 220 Nm (162.3 lb-ft) of torque. Together with a decoupler, this is integrated into the eight-speed tiptronic transmission, which transfers the power to the front wheels. System output is 180 kW (245 hp); maximum system torque is 500 Nm (368.8 lb-ft).

Audi designs science fiction car for Ender's Game movie [w/video]

Audi is no stranger to product placement in movies, but the upcoming sci-fi adventure movie, Ender's Game, will be the first time the German automaker has ever unveiled a "purely virtual" vehicle design in a movie. As the movie's star car, the futuristic Audi fleet shuttle quattro was created by Audi Design as a "vision for the future world."
This new movie car comes almost 10 years after one of our favorite Audi movie cars ever, the Audi RSQ that was prominently used in the 2004 sci-fi action film, I, Robot. Looking back, the RSQ obviously used cues from the Audi R8, but it's unclear if the fleet shuttle quattro has any design implications for future Audi production models.
The movie, based on the best-selling novel of the same name, stars Harrison Ford and Asa Butterfield, and it premiers in the US on November 1. Audi has provided images of the fleet shuttle quattro, and Summit Entertainment has released its latest trailer for the movie, which is posted below along with an Audi press release.

Audi races ahead with new R8 LMS [w/video]

The biggest news from Audi at the Geneva Motor Show may very well be the reveal of the all-new, second-generation R8 supercar. But the road-going version isn't the only one it's rolling out at the Swiss expo, where it's joined by the new competition-spec R8 LMS. Set to hit race tracks around the world next season, the new Audi R8 LMS picks up where the current one leaves off, having taken 26 GT3 Championship victories and seven 24-hour race wins between 2009 and 2014. That's a heck of a mantle to assume, but the new model looks like it'll be up to the task. Based on the new road-going R8, the new LMS is built to 2016 GT3 regulations and in many ways even exceeds them. In fact, Audi says it meets the more stringent crash requirements for the LMP1 class, and includes its state-of-the-art Audi Protection Seat PS 1 from the R18 E-Tron Quattro. It also incorporates the emergency hatch Audi built in to its DTM racers. Of course, there's more to the new R8 LMS than safety. Despite the addition of those features, the whole package is a good 55 pounds lighter than the outgoing model, thanks to the lightweight spaceframe chassis and the increased use of carbon-fiber components – all the while offering more torsional rigidity. Power still comes from Audi's celebrated 5.2-liter V10 engine producing 585 horsepower, but is now mated to a new six-speed sequential gearbox and benefits from an entirely new electrical system, improved airflow and optimized aerodynamics. All that and more ought to help the new R8 LMS and its customer racing teams achieve the success they're after once it makes its competitive debut at the Nurburgring 24-hour race in mid-May 2016. Related Video: AUDI R8 LMS ESTABLISHES NEW RACE CAR GENERATION: LIGHTER AND SAFER THAN EVER BEFORE Ingolstadt, March 3, 2015 – Audi is again running in front. As one of the first automobile manufacturers to do so at the beginning of the 2015 season, the brand with the four rings is presenting a race car that already meets the requirements of the new GT3 regulations to be introduced in 2016. The new Audi R8 LMS is lighter and safer than ever before. It features even more race car technology, clearly improved aerodynamics and, as a result, provides customers with an efficient concept. Back in spring of 2014, Audi began testing the new R8 LMS that is following in big footsteps.