2011 Audi Q7 3.0tdi*prem Plus*20"wheels*navi*camera*cold Weather*pano*brand New! on 2040-cars

Auto blog

Next-gen Audi Q7 shows off its wares ahead of Detroit

Audi has put the Q7 on a massive diet, trimming over 700 pounds. Meet what is sure to be one of the bigger debuts at the upcoming 2015 Detroit Auto Show. The next-generation Audi Q7 has been the subject of spy shots and conjecture for quite some time. After all, it was easily the oldest vehicle in the Audi range, having hit the market way back in 2006. But with this new model, Audi has comprehensively updated its fullsizer, adding some cutting-edge tech, updating some classic engines, and taking a whole lot out. As is the theme nowadays, particularly among large crossovers and SUVs, Audi has put the Q7 on a massive diet with a mix of ultra-high-strength, hot-shaped steel and aluminum, trimming over 700 pounds of body fat and lowering the Q7's weight to just under 4,400 pounds. This was accomplished while maintaining virtually identical dimensions to the current model. While Audi USA hasn't released its info on the Q7, the Euro-spec model will continue to offer a pair of engines that should be very familiar to US consumers, with a 3.0-liter, supercharged V6 gas engine and a 3.0-liter TDI V6. The European engines, though, have had their CO2 emissions halved, while actually increasing performance (we should expect similar from the US engines). The 3.0-liter TDI has been bumped up from 240 horsepower to 272 ponies, while torque is up from 406 pound-feet to 443. The 3.0-liter TDI has been bumped up from 240 horsepower to 272 ponies, while torque is up from 406 pound-feet to 443. This extra grunt has trimmed the 0-60 time from a leisurely 7.3 seconds down to 6.3, while the fuel economy has jumped up to 41.3 US miles per gallon, converted from the European cycle (so expect the EPA numbers to be a bit lower). The supercharged 3.0-liter, meanwhile, has been amped up to match the output of its application in the S4 sport sedan, jumping from 280 hp and 295 lb-ft to 333 ponies and 325 lb-ft. Once again, the 0-60 time falls dramatically thanks to the power bump and weight loss, dropping from 7.7 seconds to a far more zippy 6.1. The most exciting news is the long-rumored arrival of the Q7 E-Tron, a plug-in hybrid that's mated to a six-cylinder diesel engine and Quattro all-wheel drive. Audi claims this world-first production powertrain will return 138.4 US miles per gallon, emit less than 50 grams of CO2 per kilometer and allow the Q7 E-Tron to travel up to 35 miles on electric power alone.

First impressions of Audi's next TT interior and Virtual Cockpit [w/video]

Not content to pummel CES show goers with laser lights and self-piloting vehicles, Audi has also pulled the wraps (well, some of the wraps) off the interior of its upcoming next-gen TT. While the car itself wasn't on hand for us to check out, Audi did mock up the cockpit, complete with its all-new Virtual Cockpit central display and the latest iteration of the company's Multi Media Interface (MMI).
Virtual Display is Audi's new brand name for a completely digital reinterpretation of the instrument binnacle, by way of a 12.3-inch TFT screen. Audi tells us that there are two operable modes for Virtual Display: in the standard mode, an average-sized tachometer and speedometer flank a smaller infotainment portion in the center. Infotainment mode, meanwhile, shrinks the gauges to discreet circles and allows the navigation map, audio controls, or whichever system is being operated by the driver, to fill the remaining screen real estate.
This design, says Audi, allowed engineers to slim down the size of the center console as a whole, without reducing function for the driver. We can say that it looks very impressive as a demonstrator, but we will need some time with it in a moving vehicle before we're convinced it isn't slightly more distracting that a traditional setup.

Production 4.0: Audi plans for the smart factory

Automotive production is becoming more integrated and at the same time has to be more intelligent and more efficient. Flexible production of customized vehicles is one of the big challenges for the future, especially for a premium carmaker like Audi. How will the "Vorsprung durch Technik" brand meet its aim of offering premium quality with added custom flexibility? The company sees the "smart factory" as the key. Whether it's body-color moldings or light-alloy wheels in a special size, almost every car is ordered with some kind of customization, and the demands are increasing. This requires of course already a lot of flexibility. While the variety of models and quality demands are increasing, automotive manufacturers such as Audi are eager to make production sustainable. In an Audi interview, innovation management members Alois Brandt and Henning Loser talk about "production 4.0" and the upcoming "smart factory." How will Audi manage the production site with its very high standards of quality, efficiency, and environmental acceptability? Will the so-called "smart factory," which should be the intelligent factory of the future, only employ robots? Alois Brandt: "With a deep look into the production, I am convinced that our employees and not machines are the relevant working forces behind the Audi brand. Machines can be bought anywhere." Increasing digitalization is paving the way for the smart factory – the intelligent, digitally connected production facility. New high-tech solutions in manufacturing should further increase the high level of quality, while at the same time the assembly work should be easier and result in better ergonomics. Can you give us a clearer imagination of the "smart factory"? Alois Brandt: "There are a lot of ideas. But the big question at the moment is: Which one is really needed and leads into the right direction?" Can you tell us a little bit more about "production 4.0"? Alois Brandt: "The assembly line as we know it in the present will no longer play the same role. If it makes sense, it will be terminated and replaced by – let's call it – a virtual assembly line. The production will be more modular than before and the car will be directed to a production point – a so-called 'island of competence' – where it is needed." Henning Loser: "If the vehicle is to be assembled to the customer's wishes, it is obvious that efficient programming of robots and coordinating with the human workers is needed.