2012 Audi Q5 Prestige W/s-line Sport Utility 4-door 3.2l on 2040-cars

Auto blog

Audi Airomorph is a sleek shape-shifting senior thesis

Eric Kim just graduated from the from the Art Center College of Design in Pasadena, CA, at the end of the spring 2014 semester, and for his senior thesis project he came up with this futuristic Audi endurance racer called the Airomorph. He even got some input Audi designer Kris Vancoppenolle.
The Airomorph imagines a future Audi racer for Le Mans that features adjusting fabric panels to fine-tune the car's aerodynamics as it laps the course - a technology inspired by catamaran racing. "I started from scratch and had the freedom to deliver and execute a white space design for the future," said Kim to Autoblog via email. It's also somewhat similar to the idea behind BMW Gina concept, although Kim says that wasn't an inspiration for his design. The body here is made from a single piece of a silver, expansion-resistant material stretched over a frame underneath. The fabric anchors at the wheels, front and rear section with movable cables, and hydraulic actuators pull the wires to shift the aero as needed.
The actual shape echoes Audi endurance racers from the past and present. In profile, you can easily see the current R18 with its arcing cockpit and fin down the rear. Of course, that's interpreted through a little bit of Blade Runner with the covered wheels sticking out from the body. The front shows the rectangular shapes from the earlier R15. There doesn't appear to be any way to actually see out of the vehicle, though.

Audi boosts A3 Sportback e-tron plug-in hybrid production to 50 a day

Should we try to translate "Damn the torpedoes, full speed ahead" into German? Audi might force us to do that. That's because the German automaker has stepped up production of its new plug-in vehicle – the A3 Sportback e-tron plug-in hybrid – which is never a bad thing. Audi was circulating prototypes of the PHEV as early as 2012 and launched production this summer at a clip of 30 vehicles a day. Now, the company is saying that it's upped that daily production rate to 50. That's not exactly Ford F-150 manufacturing territory, but it's a pretty good sign that more Europeans are clamoring for the plug-in than Audi expected. The A3 E-Tron is priced at about $51,000 in Germany and pairs a 1.4-liter gas-powered engine with an electric motor to produce 204 horsepower and get the car from 0 to 60 miles per hour in less than seven and a half seconds. More impressively, the A3 Sportback e-tron plug-in hybrid can go 30 miles on electricity alone plus another 550 miles on gas power, and gets a Euro-based fuel-economy rating of a monstrous 156 miles per gallon. Check out Audi's press release below and take a look at our drive impressions here. On the line and on time: Production of the Audi A3 Sportback e-tron • First plug-in hybrid model drives off the assembly line in Ingolstadt • Assembly processes integrated into the A3 line • Maximum safety for employees, top quality for customers Production of the Audi A3 Sportback e-tron: Assembly – On the engine and component assembly line, the electric motor and transmission are fitted to the engine. Approximately 50 cars every day, with the same timing and on the same assembly line as the other models: Audi is now ramping up production of the Audi A3 Sportback e-tron*. The premium manufacturer is producing its first plug-in hybrid model at the brand's main plant in Ingolstadt. "We started series production of the Audi A3 Sportback e-tron in the summer," said Dr. Hubert Waltl, Board of Management Member for Production at AUDI AG. "Most of the assembly work is integrated into the A3 line; no separate manufacturing is necessary. That demonstrates the flexibility and efficiency of our production planners and employees." With the Audi A3 Sportback e-tron, Audi is launching the mobility of the future. The compact five-door combines a 1.4 TFSI combustion engine with a 75 kW electric motor, resulting in a total system output of 150 kW (204 horsepower).

Audi moves to patent electric Quattro and active-shutter wheels

Audi might have a few tricks up its sleeve for the coming years, with the Brits at Autocar uncovering a pair of patent filings made by the German luxury brand. The first is something we've seen before - wheel flaps - while the second is an evolution of one of Audi's trademark technologies.
We last saw wheel flaps on the Ford Atlas Concept in 2013, but the futuristic fuel-saving tech has so far failed to arrive on a production car. Audi may be seeking to change that, patenting the flaps that open and close automagically based on airflow. They can also open if the brakes get too hot.
The second patent is an evolution of Audi's Quattro all-wheel drive. The new AWD system uses an electrically driven rear axle and wheel sensors to figure out when and at which corner the car might lose traction, and is targeted largely at hybrid offerings, which is a field Audi has only recently dipped its toe into.