2006 Audi A8 Quattro L Sedan 4-door 4.2l on 2040-cars

Auto blog

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.

2019 Volvo V60 vs. wagon competitors: How they compare on paper

The next-gen Volvo V60 was finally revealed this week. The outgoing model has been on sale since 2011, getting a few minor updates along the way. The new model is based off Volvo's Scalable Platform Architecture that underpins other models like the XC90 and XC60 crossovers and V90 wagon. The V60 will launch with two engines, with a powerful hybrid coming sometime down the line. Since the last V60 hit the market, Audi, Buick and BMW have all released their own flavor of wagon. Like Volvo, BMW sells a traditional sedan-based model. Audi and Buick's wagons are both high-riding models with some very slight off-road pretense, much like Volvo's Cross Country models. We don't have details on the upcoming V60 Cross Country, but, even when accounting for ground clearance, the V60, BMW 3 Series Sport Wagon, A4 Allroad and Buick Regal TourX have a lot of overlap. Check out the specs breakdown below. Discover and compare other wagons and crossovers with our Car Finder and Compare tools. Engines, transmissions and drivetrains Out of the four wagons, the new V60 is the only one that offers two-wheel drive and a hybrid variant. The base V60 T5 uses a 250-horsepower turbocharged 2.0-liter inline four and sends power to the front wheels. Stepping up to the V60 T6 nets buyers an additional 66 horsepower thanks to a twincharged — supercharged and turbocharged — 2.0-liter and all-wheel drive. A T8 model that uses a 390-horsepower plug-in hybrid powertrain will be available soon. All V60s use an eight-speed automatic. The Audi, BMW and Buick are all powered by 2.0-liter turbocharged inline-fours. Additionally, the 3 Series has a 2.0-liter turbo diesel. All three wagons have standard all-wheel drive. The BMW and Buick use an eight-speed automatic, while the Audi sends power through a seven-speed dual-clutch transmission. As base engines go, there's a four-horsepower difference between the most and least powerful models, though the Buick wins out on torque. The V60 T6 matches the Regal TourX's torque figure and trounces every competitor's horsepower rating. The V60 T8 packs more power and torque than any of the competition. Cargo and interior space The outgoing V60 was on the small side for a wagon. This new model rectifies that a bit, though its 48.2 cubic-feet of cargo space with the second-row folded is still substantially smaller than the competition.

Recharge Wrap-up: Ferrock a carbon-negative cement substitute, Audi makes e-diesel

A cement alternative uses recycled materials and traps CO2 rather than producing it. Invented by David Stone at the University of Arizona, Ferrock uses recycled steel dust and glass to produce a substance stronger than conventional concrete. Cement has a high carbon footprint from the high heat needed to process the limestone. Ferrock needs no such heat, and it actually uses CO2 to harden, making it, as Stone calls it, a carbon-negative material. Learn more in the video above, see the transcript at PBS NewsHour and read more at Green Car Reports. Teslarati offers a detailed rundown of Tesla's new Valet Mode feature for the Model S. Part of the Firmware 6.2 update, Valet Mode allows the owner to disable certain performance features and block personal information when letting someone else drive the car. It limits the car's to speed to 70 miles per hour, and caps output at 80 kW. It can also disable mobile app access, Homelink, Bluetooth and wifi and the "Places" function, which stores addresses for you. The folks at Teslarati did find some shortcomings in the new feature, though. Read more at Teslarati. Audi has produced its first batch of e-diesel made from water and CO2. The fuel is made by reacting hydrogen from the water with CO2 to make long-chain hydrocarbon compounds called "blue crude." That can then be refined similarly to crude oil to make e-diesel, which is a fuel free from sulfur and aromatic hydrocarbons. That e-diesel can be used on its own, or mixed with fossil fuel diesel to power a vehicle. "In developing Audi e-diesel we are promoting another fuel based on CO2 that will allow long-distance mobility with virtually no impact on the climate," says Audi Head of Sustainable Product Development Reiner Mangold. Read more in the press release below. Fuel of the future: Research facility in Dresden produces first batch of Audi e-diesel - The verdict: Pilot plant produces high-quality diesel fuel - No need for mineral oil: e-diesel made from water, CO2 and green power - Minister Wanka: "Synthetic diesel using CO2 is a huge success" Audi has taken another big step in the development of new, CO2 neutral fuels: A pilot plant in Dresden has started production of the synthetic fuel Audi e diesel. After a commissioning phase of just four months, the research facility in Dresden started producing its first batches of high-quality diesel fuel a few days ago. To demonstrate its suitability for everyday use, Federal Minister of Education and Research Prof.