Turbo 5 Door Sport Sedan Southern No Rust! No Reserve! S-line Performance Clean! on 2040-cars

Auto blog

Audi Sport Quattro Concept to spawn volume sports car?

There have been two modern re-imaginings of the original 1984 Audi Ur-Quattro: the Quattro Concept of 2010 (shown above) and the Sport Quattro Concept revealed at the 2013 Frankfurt Motor Show. In between them, there have been numerous rumors about what, if any, kind of production car Audi might make of them. According to a new report in Auto Motor und Sport, Audi CEO Rupert Stadler has "indicated... that the car will come," and based on the specs presented, what we get might end up being a mix of the two.
Ulrich Hackenberg, Audi's head of R&D, apparently wants a sports car with wider appeal than the 700-horsepower hybrid Sport Quattro Concept. AMS says his vision would be built on a modified A6 platform - the same MLB architecture under the Sport Quattro Concept - with ample use of carbon and aluminum keeping the weight down to around 1,300 kilograms (under 2,900 pounds). Engines could include a 2.5-liter, five-cylinder (like that of the original, smaller Quattro Concept) offering anything from 310 to 360 hp. Those numbers would be at least 48 horsepower shy of the first concept, but a less-powerful entry point to a new model range would provide a lower cost of entry. Besides, a full model range would likely include a significantly healthier powertrain option on the top end.
At the moment, Hackenberg is said to be unsatisfied with the design of the car, which could well mean we'll get another concept car before a production version appears.

Recharge Wrap-up: Nissan "religious" about zero-emissions, Tesla crashes at dealership, Formula E on-board video

Nissan is pretty darn serious about being king of the EV industry. Just see what Chief Planning Officer Andy Palmer has to say at the launch of the e-NV200: "When it comes to zero emissions, we're absolutely religious. We'll be the absolute, No. 1 leader in zero emissions. No doubt. That's our positioning." Bold words, to be sure. Toyota, on the other hand, ended its collaboration with Tesla (whom Nissan mustn't forget about in its quest to reign supreme in the EV world) to build the RAV4 EV, and will focus instead on hybrids and testing the waters with hydrogen cars. Says Jim Lentz, CEO of Toyota North America, "I would rather invest my dollars in fuel cell development than in another 2,500 EVs." Read more at Automotive News or Autoweek. To celebrate 25 years of TDI technology, Audi is releasing the A7 Sportback 3.0 TDI Competition special edition in Europe. The Competition uses Audi's biturbocharged, 3.0-liter diesel engine boosted to 326 horsepower, giving the car a 0-62 time of 5.1 seconds. It comes with the S line sport package and is offered in four exterior colors: Daytona Gray, Misano Red, Nardo Gray and Sepang Blue. The interior is black leather, with the option of Misano Red or Agate Gray contrast stitching. The Competition edition will go on sale in August starting at ˆ72,000 (about $97,700). Audi's first Turbocharged Direct Injection engine debuted at the 1989 Frankfurt Motor Show in the Audi 100 2.5 TDI. See the press release down below for more details. There was another Tesla Model S crash recently, this one at the Tesla Store. The driver apparently crashed the freshly purchased car into the Tesla sign before even making it off the lot. According to Reddit user s1lentway, who was at the Tesla Store in Fremont, California when it happened, "We believe this is someone who just got their car. They must have been driving it for less than a minute and lost control, crashing right into the sign missing the showroom glass windows only by a few inches." Wrecked Exotics suggests the driver hit the accelerator instead of the brake pedal. Probably the best comment in the Reddit post: "Edison strikes again." See the original post at Reddit for more corny jokes, speculation and similar stories from other users. Take a lap in a Formula E racecar. The video below offers up the sights and sounds of a hot, wet lap in the open-cockpit, all-electric Spark-Renault SRT_01E.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.