2.0l Cd Turbocharged Traction Control Stability Control Front Wheel Drive Abs on 2040-cars

Auto blog

Former Audi chief designer Wolfgang Egger leaves Italdesign

The latest word from the international community of automotive designers has it that Wolfgang Egger is leaving Italdesign, but just where the accomplished designer will land next and who will take his place remain big question marks. Egger is a designer who has bounced back and forth between Italy and Germany over the course of his career. He was born in Germany but studied in Milan. He began his career at Alfa Romeo in 1989 and was named its chief designer by 1993 before being head-hunted by the Volkswagen Group in 1998 to head up the design department at Seat. A few years later he went returned to Italy to run the Lancia design department, and was subsequently renamed to the same post at Alfa Romeo. In 2007 he went back to his native Germany to head up the Audi design office, over which he assumed complete responsibility by 2012, but left Audi in 2013 to run Italdesign. For those unfamiliar, Italdesign is the studio founded by Giorgetto Giugiaro (pictured at left next to Egger) back in 1968 but which, along with many other Italian design houses, fell on hard times in recent years. The Volkswagen Group swooped in to rescue the troubled studio in 2010, turning it into something of an in-house advanced design department to provide an alternative perspective on the direction in which the group and its various brands could take their respective designs moving forward. With Egger now leaving its helm, Italdesign and its German parent company will need to find his replacement, and we're sure they'll announce one in due course. The bigger question on our minds, however, is where Egger himself will head next. Given the path his career has taken to date, we wouldn't be surprised to see him land elsewhere in the Volkswagen Group or find a new role in the expanding Fiat Chrysler Automobiles empire. Then again, Egger could find it time to open an entirely new chapter. Watch this space. News Source: Car Design NewsImage Credit: Newspress Design/Style Hirings/Firings/Layoffs Audi Volkswagen designer italdesign giugiaro wolfgang egger

Audi builds 5-millionth vehicle with Quattro

Quattro, the trademark name Audi has put on its all-wheel-drive system engineered for passenger vehicles, recently celebrated its five-millionth installation. The driveline has been offered in more than 140 different vehicles since its introduction more than three decades ago.
The all-wheel-drive technology made its world debut at the 1980 International Geneva Motor Show, beneath the floorpan of the Quattro Coupé, a low-volume two-door. It didn't take consumers long to embrace Audi's innovative approach. While most four-wheel-drive systems at that time utilized heavy transfer cases or second cardan shafts, Quattro was virtually tension-free, light, compact and efficient. Most importantly, enthusiasts found it was especially suitable for sports cars.
Today, the automaker offers Quattro on its full line of passenger vehicles and it is unquestionably successful (the technology enjoyed a 43 percent take rate in 2012). On models with transverse-mounted engines (A3 and TT), Audi uses an electronically controlled multi-plate clutch with hydraulic actuator. Under normal conditions, the clutch sends power almost exclusively to the front wheels (if wheel slippage occurs, up to 100 percent of the torque may be sent to the rear). Vehicles with transverse-mounted engines (A4, A5, Q5, etc...) use a self-locking center differential sending 40 percent of the engine torque to the front axle and 60 percent to the rear under normal conditions (it is able to send the majority of the power to the axle with better traction when needed). The highest-performing Quattro systems use torque vectoring to further improve cornering grip and speeds.

Audi races ahead with new R8 LMS [w/video]

The biggest news from Audi at the Geneva Motor Show may very well be the reveal of the all-new, second-generation R8 supercar. But the road-going version isn't the only one it's rolling out at the Swiss expo, where it's joined by the new competition-spec R8 LMS. Set to hit race tracks around the world next season, the new Audi R8 LMS picks up where the current one leaves off, having taken 26 GT3 Championship victories and seven 24-hour race wins between 2009 and 2014. That's a heck of a mantle to assume, but the new model looks like it'll be up to the task. Based on the new road-going R8, the new LMS is built to 2016 GT3 regulations and in many ways even exceeds them. In fact, Audi says it meets the more stringent crash requirements for the LMP1 class, and includes its state-of-the-art Audi Protection Seat PS 1 from the R18 E-Tron Quattro. It also incorporates the emergency hatch Audi built in to its DTM racers. Of course, there's more to the new R8 LMS than safety. Despite the addition of those features, the whole package is a good 55 pounds lighter than the outgoing model, thanks to the lightweight spaceframe chassis and the increased use of carbon-fiber components – all the while offering more torsional rigidity. Power still comes from Audi's celebrated 5.2-liter V10 engine producing 585 horsepower, but is now mated to a new six-speed sequential gearbox and benefits from an entirely new electrical system, improved airflow and optimized aerodynamics. All that and more ought to help the new R8 LMS and its customer racing teams achieve the success they're after once it makes its competitive debut at the Nurburgring 24-hour race in mid-May 2016. Related Video: AUDI R8 LMS ESTABLISHES NEW RACE CAR GENERATION: LIGHTER AND SAFER THAN EVER BEFORE Ingolstadt, March 3, 2015 – Audi is again running in front. As one of the first automobile manufacturers to do so at the beginning of the 2015 season, the brand with the four rings is presenting a race car that already meets the requirements of the new GT3 regulations to be introduced in 2016. The new Audi R8 LMS is lighter and safer than ever before. It features even more race car technology, clearly improved aerodynamics and, as a result, provides customers with an efficient concept. Back in spring of 2014, Audi began testing the new R8 LMS that is following in big footsteps.