2012 Acura Zdx Zdx on 2040-cars

Auto blog

Acura NSX GT3 swings through New York en route to the track

Supercars are developed for the road, but sometimes the prospect of putting them on the track proves just too tempting to pass up. McLaren found out just that with the legendary F1, and now its racing partner Honda is doing the same with the new Acura NSX GT3 you see here. Unveiled here at the 2016 New York Auto Show, the NSX GT3 is based closely on the road-going version, but with several key differences. For starters, it ditches the trick hybrid all-wheel-drive system, not unlike the Type R we're expecting to follow. It keeps the 3.5-liter V6, but purely in twin-turbo guise (with no electrical boost in sight), driving the rear wheels through a six-speed sequential gearbox instead of the nine-speed dual-clutch transmission. The aluminum space frame carries over, but comes draped in extensively modified bodywork with more extreme aero to keep it cool and glued to the track. Since it's been designed to FIA GT3 regulations (and not the more advanced GTE), we shouldn't expect to see it competing at Le Mans against the new Ford GT (among others). But it will be in prime position to take on championships like the Pirelli World Challenge, Blancpain Endurance Series, and even the lower GT300 class of Japan's own Super GT series. Wherever it competes, though, it positively looks the business even sitting still, and we're looking forward to seeing it run. Acura Unveils NSX GT3 Racecar in New York Mar 23, 2016 - NEW YORK, NY - Twin turbocharged NSX supercar to campaign in North American competition starting 2017 - NSX slated to undergo homologation this fall as an FIA GT3 class racecar - Racecar body to be built by the Performance Manufacturing Center in Marysville, Ohio, the exclusive manufacturing home to the all-new Acura NSX supercar; engine to be produced in Anna, Ohio Acura took the wraps off a NSX GT3 racecar today at the 2016 New York International Auto Show, announcing its intention to campaign the twin-turbocharged NSX supercar in North America starting in 2017. The NSX is currently undergoing testing and slated for homologation as an FIA GT3 class racecar this fall. The unveiled Acura NSX GT3 racecar featured custom bodywork and aero components including a large deck wing spoiler, underbody diffuser and enlarged hood vents for efficient engine cooling.

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Acura NSX owners receive custom short teaser movies of their personal car

In a neat bit of fan service for those who've ordered Acura's new NSX halo car, the company will make a short film that reflects the way the car's been configured. Those films are on their way to future owners as you read this. In addition, they'll get a 1:18 scale custom model of their own car, reflecting every appearance option inside and out. That's neat. So neat, in fact, that we decided to commission our own video. We got together and configured a car in the lovely Nouvelle Blue Pearl, and sent our build over to Acura. They put together a video that's mostly representative of what an owner would see. You can see our build plate (hint: it says "Autoblog – Precision Crafted By Performance Manufacturing Center" on it), and that's "our" car on the dyno starting about 22 seconds in. If you want to check out someone else's film, you can compare our build to Jay Leno's. The reason Acura can do this is that there simply aren't that many available configurations for the NSX. This is at the root of one of the main criticisms some of our editors have about the car. An NSX starts at darn close to $160,000, and there are eight paint options (not too bad), four interior color options, and three seating options. All well and good, but compare that to the 16 paint and 12 interior color/material choices in a 911 Turbo, for example, choosing a similarly high-performance car at a similar price range. And there's a further wrinkle: Porsche will paint your car to match a sample you provide, so in reality the ability for an owner to make the car uniquely theirs is infinite, if you don't mind paying for it. See also the BMW Individual program, or McLaren's MSO one-offs. We're not just talking about the MSO Defined options, but the MSO Bespoke program itself, which will basically do anything you want to the car as long as it's road legal and your check doesn't bounce. We've been to MSO, and they're not kidding: they'll build anything. So yes, these custom videos are nice fan service, and they'll certainly jazz up the buyers who've already ordered one of these dynamically impressive cars. It's a move that builds loyalty, and certainly doesn't have much of a drawback. But for us, already a bit sensitive to Acura's conservative option list for the NSX, it serves to highlight the gap between Acura and the more established brands in catering to well-off customers' desire for bespoke range-topping creations.