Leather Auto Sunroof Cruise Control on 2040-cars

Auto blog

2020 Acura NSX Suspension Deep Dive

The Acura NSX has been a special car as long as I’ve been in the business. The first one came out in 1990, the same year I started my career in automotive engineering. I vividly remember driving one briefly back then when we brought one in for benchmarking. I'd drive it again 22 years later when my previous employer bought a used 1991 example for a long-term test. Reader interest was sky-high and the car was still gorgeous, but the march of time and automotive engineering had clearly left it behind. Then, in 2016, a second-generation NSX emerged, and it was packed with bleeding-edge thinking. It has a 3.5-liter twin-turbo V6, but this new NSX is a hybrid with an electric motor-generator sandwiched between the engine and its nine-speed DCT transmission. Two more electric motors – one for each wheel – power the front axle. There they can add traction, regenerate electricity under braking and dole out hyper-accurate levels of torque vectoring. The carÂ’s tire package was changed from Continental SportContact 5 to SportContact 6 tires in 2019, and numerous suspension re-tuning tweaks came along with them. The result is a lively and well-balanced car that is relentless when driven hard and a pussycat around town. LetÂ’s see what theyÂ’ve got going on under there.   At first glance the 2020 Acura NSX appears to have dual wishbone front suspension. But we canÂ’t tell for sure because that big two-piece brake rotor is in the way. The coil-over shock looks obvious, but a few odd details are apparent even from here.   This view also seems to indicate double wishbone suspension. But the pivot axis (green arrow) between the upper and lower ball joints looks wrong – itÂ’s far too vertical. WeÂ’re missing something. But I would be remiss if I failed to point out a few other things before we moved on. For one, the front drive axle confirms this to be an all-wheel-drive machine. Second, the forged aluminum damper mounting fork (yellow) that envelops the axle is mounted to the lower arm about 75% out from the armÂ’s inner pivot. The spring and damper motion ratio would be 0.75-to-1 relative to wheel movement, with a tiny reduction due to its lean angle. Lastly, just look at the huge cast aluminum upright (white). Beautiful. Normally these are called hub carriers or steering knuckles, and I use the terms interchangeably. But the motorsports-derived term upright is normally applied when the piece is tall and, well, upright like this one.   This explains everything.

Acura TLX caught naked in production guise, can you spot the differences?

Acura doesn't tend to do concept cars these days that don't foreshadow a specific upcoming production model. The ZDX prototype of 2010 previewed the production version, as did the ILX and RLX showcars of 2012 and the MDX of 2013. The NSX concept is on its way to production, as the SUV-X concept is likely to do as well in the coming years. So when Acura revealed the TLX prototype at the Detroit Auto Show a few months ago, we all but knew it would only be a matter of time before that, too, would be produced. And here it is.
Spied all but completely undisguised while undergoing testing, this pair of TLX prototypes (one in white, one in black) looks almost identical to the show car. You might spot a few minor tweaks here and there - the strip of LEDs in the lower front bumper have been replaced by round fog lamps and some of the chrome accents are missing - but by and large, we're looking at the same vehicle we saw in Detroit earlier this year.
The finished production version of the TLX is expected to debut at the New York Auto Show next month, after which it will replace both the TSX and the TL, slotting in between the smaller ILX and the larger RLX in Acura's sedan lineup.

Acura may go all AWD in bid to mimic Subaru's success

Acura's struggles have been well publicized. The Honda-owned luxury brand doesn't seem sure of where it's going or what it's trying to accomplish, with its cars and marketing lacking a coherent theme. Now, a new report from Automotive News claims that the brand could follow the success of Subaru and (to a lesser extent) Audi, and adopt all-wheel-drive as standard across its model range.
"I think that's the way we should go," Acura boss Koichi Fukuo told Automotive News.
Acura already offers some form of all-wheel drive on every vehicle in its line aside from the lamentable ILX sedan. That could change as Acura begins rolling out next-generation versions of its still relatively new stable of sedans and crossovers.