4dr Sdn Mt Manual 3.2l Bluetooth Sunroof 4-wheel Abs 4-wheel Disc Brakes A/c on 2040-cars

Auto blog

Acura NSX GT3 to make public debut this week at Mid-Ohio

The new Acura NSX had a very long and very public gestation period. The car went through a number of redesigns and revisions, all while enthusiasts watched and waited. With the production version just now ramping up for customer deliveries, Acura revealed that it was working on a race car for FIA GT3 homologation. While the car was shown in New York, no one outside of Honda has seen it testing on track. This week, the NSX GT3 will make its public testing debut at Mid-Ohio Sports Car Course ahead of the Pirelli World Challenge and IndyCar races. View 13 Photos While the car will be on track during testing and practice sessions, it won't actually be competing with the rest of the field. The car is still in the testing phase and won't be fully FIA approved until at least September. Acura is confident that the car will make its racing debut in 2017. The company also made it clear that this is not the final version of the car and that things like aero and engine tuning are still being worked out. Until now, the NSX GT3 has only tested at private events in Europe, Japan and the US. This week, the NSX GT3 will be piloted by Dutch racing driver Peter Kox. Kox drives for RealTime Racing, a team that currently campaigns an Acura TLX GT. This week's car will be the primary tester, though if something goes sideways there are multiple backup cars. The NSX GT3 differs in a number of ways from the road car, most notably its lack of hybrid all-wheel drive system. The NSX GT3 uses the same twin-turbocharged V6 as the road car, but sends all the power through the rear wheels. It also uses the same space frame as the road car. While the road going version receives final assembly in Honda's Ohio factory, final touches to the GT3 car are done elsewhere. Although the car will only be testing on Thursday and Friday, it will be on display all weekend in the paddock. For more info on this weekend's Mid-Ohio race, check out the Pirelli World Challenge page here. Related Video: Motorsports Acura Honda honda nsx acura nsx gt3

2015 Acura TLX configurator ready to spec your 'red carpet athlete'

When Acura launched the new TLX sedan as a prototype at the 2014 Detroit Auto Show it promised that the car would be a "red carpet athlete." Presumably that meant it would mix photogenic looks with an engaging drive. Now, it's your chance to dress up the vehicle for the festivities with its new configurator that's just hitting the Web.
Prices start at $30,995* for the basic 2.4-liter four-cylinder with 206 horsepower and an eight-speed dual-clutch automatic or $35,220 for the least expensive 3.5-liter V6 with 290 hp with a nine-speed auto, but the bill goes all the way up to $44,700 for a V6 with all-wheel drive and the Advance Package (*plus a $895 destination and handling charge for them). Only the six-cylinder can be optioned with all-wheel drive, but all front-wheel-drive models get Acura's slick P-AWS system that steers the rear wheels.
Outside of the available Technology and Advance packages, the options are kept pretty slim. The range of colors is fairly subdued too with shades of black, white and silver, plus dark blue, dark red and a deep brown called Black Copper Pearl. Upholstery options are limited to a few choices for each exterior color.

Acura confirms more 2016 NSX details

Acura served up a slew of engineering details about the soon-to-launch 2016 NSX. Fittingly, they were explained at a dinner at the SAE International World Congress in Detroit, where morsels about the new Acura supercar were likely gobbled up quicker than the main course. Among the highlights: The NSX will mark Acura's first use of a multimaterial space frame, and it includes high-strength steel and aluminum. This will allow the NSX to hit its weight targets, while maintaining rigidity. The NSX uses a so-called "ablation" technology, which allows the ultra-rigid castings to be used within the car's crush zones. For more details on this, scroll through the press blast below. As expected, the NSX will pack a twin-turbo V6 engine, and Acura confirmed it will displace 3.5 liters. The unit will be mounted amidships and team with hybrid components to increase performance and efficiency. The supercar also features the most advanced evolution of Acura's Super Handling All-Wheel-Drive system, and it's capable of distributing more torque than any other setup the brand has used. The NSX has 10 air-cooled heat exchangers that will cool the powertrain, and the V6 alone will have three radiators. There are also twin intercoolers in the side air intakes that further cool the system. The next generation of the NSX was unveiled in January at the Detroit Auto Show, and production launches this fall in Ohio. Related Video: New Technical Details of the Next Generation Acura NSX Revealed at SAE 2015 World Congress and Exhibition . DETROIT, April 23, 2015 – In advance of the market launch of the highly anticipated next generation Acura NSX, the engineers leading the supercar's development shared new technical details and design strategies with the automotive engineering community at the April 22nd SAE Detroit Section dinner, held in conjunction with the SAE 2015 World Congress and Exhibition. Additional information about the team's efforts to achieve a true "New Sports Experience" included details of the NSX's world's first body construction process that helped create a multi-material space frame resulting in class-leading body rigidity, the advanced total airflow management system and an update on NSX's power unit specifications. Ted Klaus, chief engineer and global development leader of the new NSX, introduced key powertrain, body and dynamic performance engineers who shared new product and technical details in their related areas of the development.