2010 Acura Tech Hpt Fully Loaded Navi Back Up Camera Heated Seats Sunroof White on 2040-cars

Auto blog

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video:

Honda protective of Type R name; NSX Type R not in the works

During a roundtable during a recent event hosted by Honda, we joined in on a roundtable interview with Honda Technical Consultant Ko Yamamoto and Honda Civic Type R Project Leader Hideki Kakinuma. Questions were asked about the Type R brand broadly, as well as the potential for some new projects. The answers were both good news and disappointing news for Honda fans. The good news is that Honda takes the Type R name and brand very seriously. Yamamoto and Kakinuma explained that the name and its associated red "H" badge are only for vehicles with a racing connection, such as the Honda Civic Type R that has a couple of racing variants. As such, you won't be seeing a CR-V, Odyssey or Insight with the Type R name. Furthermore, the Type R name is only for Honda-badged vehicles, despite the existence of the Acura Integra Type R a couple decades ago. We also asked about the potential of an NSX Type R, which certainly meets the performance and racing credentials mentioned, but is much more of an Acura product and is badged as such in the U.S. Kakinuma and Yamamoto couldn't go into deep detail, but they said that there aren't plans for one at the moment, and the chances of one for the U.S. are unlikely. They noted that the previous NSX Type R was a Japanese-market exclusive, and if such a car did come to fruition, that might be the case yet again. Kakinuma did say that if he was the one in charge of NSX, he would have already had it in the works. So it's not impossible that there could be an NSX Type R in the future, but don't look for one anytime soon. Related Video:

Honda to recall 1.1 million U.S. vehicles to re-replace Takata airbags

Honda said on Tuesday it would recall about 1.1 million Honda and Acura vehicles in the United States to re-replace defective Takata airbags on the driver's side. The company said it was aware of one injury linked to the defect that may have caused the airbag to rupture when it was deployed in a crash. The vehicles involved in the recall were previously repaired using specific Takata desiccated replacement inflators (PSDI-5D) or entire replacement airbag modules containing these inflators. "Those replacement inflators," Honda said in a statement, "are now deemed defective." Free repairs of the recalled cars would begin immediately in the United States with replacement parts made by alternate suppliers, Honda said. Honda became aware of the issue after a Honda Odyssey crash, where the front airbag deployed and injured the driver's arm. An investigation later showed that manufacturing issues at Takata's Mexico facility introduced excessive moisture into the inflator during assembly, leading to the problem. The total number of recalled inflators is now about 21 million in about 12.9 million Honda and Acura vehicles that have been subject to recall for replacing Takata front airbag inflators in the United States, the company said. Automakers in the United States repaired more than 7.2 million defective Takata air bag inflators in 2018, as companies have ramped up efforts to track down parts in need of replacement. Recalls Acura Honda