2008 Acura Type-s on 2040-cars

Auto blog

Acura ILX Type S could get 300-hp turbo four

There's good news and bad news when it comes to the new Honda Civic Type R. The good news is that after more than a year of prototypes and concepts, the Japanese automaker's new hot hatch is about to make its production debut next month. The bad news is that it's not coming here, but there is a silver lining in even that dark rain cloud – namely, that Honda plans on slotting its 2.0-liter VTEC turbo four into something that it will actually offer Stateside. Earlier rumors suggested the US donor vehicle would also be a Civic, but the latest intel indicates it could be something different, albeit related. According to Car and Driver, which spoke recently with Acura product planning manager Gary Robinson, Honda's luxury division could be gearing up to shoehorn the engine into the recently updated ILX – which itself is based on the Civic. "Acura is always going to get the best engines Honda makes," said Robinson. "Obviously a 2.0-liter turbo is more of a must-have in the luxury world than it is in the mainstream" market, suggesting that an ILX Type S could be in the works with upwards of 300 horsepower. Getting it to fit, though, could prove a rather large challenge – and could mean the engine swap would have to wait until the next-generation model comes around. Considering that the ILX was just updated for 2016, C/D doesn't expect the full redesign to come until 2018 at the earliest. Here's hoping that if it takes that long, Honda will slot the engine into something else for US showrooms in the meantime. The revival of the Type S badge in and of itself, however, makes for an enticing prospect. The last time we saw it used was on the larger TL sedan, which upgraded the 3.2-liter V6 from the 225 horsepower to 260. Before that, the RSX jumped from 160 horsepower in the base model to 200 in the first Type S, 210 in the second and 217 in the ultimate Type R. As it stands, the new ILX (after dropping the hybrid and base 2.0 models, is powered exclusively by a 2.4-liter inline four with 201 hp on tap.

Acura introduces a sleeker self-driving test car

As we creep ever closer to an autonomous-car future, one thing is for certain, most of the driverless cars we see being tested look hideous thanks to all the sensors strapped to the roof. Today Acura introduced its second generation Automated Acura RLX Development Vehicle with updated sensors and a more pleasing aesthetic. Gone is the spinning LIDAR system replaced with a more compact and robust version of the light detection and ranging technology. It's also got updated RADAR, camera, GPS and higher performance GPUs and CPUs as well as what Acura is calling "more intelligent software algorithms to support more complex testing scenarios." Acura and its parent company Honda have been testing autonomous cars at its GoMentum Station in the Bay Area since last year with a specially outfitted RLX (shown in the video above with the spinning LIDAR system). This new car will replace that vehicle. This article by Roberto Baldwin originally ran on Engadget, the definitive guide to this connected life. Green Acura Honda Transportation Alternatives Technology Emerging Technologies Autonomous Vehicles Videos Sedan transportation gear

LoveFab headed back to Pikes Peak with NSX-based heathen [w/video]

LoveFab had a rough run at Pikes Peak 2012. During qualifying on Day Two, owner and professional driver Cody Loveland launched his car off of the course at nearly 60 miles per hour. Never ones to be dismayed by a few bruised ribs and some busted body panels, LoveFab is headed back to the hill climb for 2013, and this year, it's bringing Garrett along as a title sponsor.
Loveland's chariot of choice is officially dubbed "Turbo by Garrett/LoveFab Pikes Peak Enviate" and is loosely based on an Acura NSX. All of the stock Japanese components have been swapped for LoveFab-built pieces with the exception of the subframes and suspension.
With a dry-sump LS1 V8, chromoly-tube chassis and a full carbon fiber body, the car is about as wild as they come. With around 800 pound-feet of torque on hand and a curb weight of under 2,000 pounds, the machine should give the mountain a run for its money. The team is expected to begin testing Enviate beginning May 1. You can check out a quick interview with Loveland in the video below along with the full press release.