2008 Acura Tl Type-s Sedan 4-door 3.5l on 2040-cars

Auto blog

2017 Acura NSX First Drive [w/video]

The 2017 Acura NSX is heavy. It outweighs the original 1990 car by more than 800 pounds and is over 300 heavier than a Chevrolet Corvette Z06. The NSX is insanely complicated, with an assist motor between the twin-turbo V6 and the nine-speed dual-clutch transmission, plus two torque-vectoring electric motors at the front axle. And the NSX is expensive. It will probably cost $170,000 when it goes on sale in Spring 2016. Commence trolling. If you hadn't guessed, the new NSX isn't much like the first generation built from 1990 to 2005. But the two cars share a common philosophy. Both are Acura's interpretation of what a modern, everyday supercar should be. Based on the new car, things have changed a lot in the last 25 years. For project leader Ted Klaus, the original NSX was one reason he started working at Honda. At the 1990 Detroit Auto Show, "I sat watching that car for a while. A really long while. Even just looking at that car I could see the deep, advanced, functional beauty." The most difficult thing with the new NSX, says Klaus, is to explain how a heavier and more complicated car can outperform other cars in a way that feels like traditional lightweighting. View 33 Photos This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car. The NSX has a giant bag of neat tricks, but to understand them takes a lengthy explanation that starts with the Sport Hybrid SH-AWD powertrain. Behind the cockpit is a 75-degree, twin-turbocharged, 3.5-liter V6, made specifically for the NSX. On its own it puts out 500 horsepower and 406 pound-feet of torque. The rest of Honda's lineup uses a 60-degree layout, but the wider angle here lowers the center of gravity. Behind the engine is the rear assist motor, with 47 hp and 100 lb-ft. Hanging off the rear of that is the nine-speed dual-clutch, developed in-house. In between the front wheels is the Twin Motor Unit (TMU), a pair of 36-hp, 54-lb-ft electric motors that add or subtract forces to their respective sides. The Power Drive unit manages the electronics, and sits in the center spine of the car like a traditional prop shaft. A lithium-ion battery pack is behind the pair of seats, on the cold side of the firewall. Total system output is 573 hp and 476 lb-ft. This is not the way the NSX was supposed to be at first. The original plan was a transverse-mounted, naturally aspirated engine just like the first car.

Suspect leads LAPD on slow speed chase down the 405

A man wanted for attempted murder led Los Angeles police on a strange and erratic chase along the 405 freeway earlier this week. According to KABC, Marcos Tulio Flores was wanted by the LAPD for allegedly shooting his sister-in-law early on January 8. On the evening of January 9, police spotted Flores driving a silver Acura around Sherman Way at about 10:40 p.m. and gave chase. With police on his tail, Flores fled down Sherman Way. As he drove along, he sped up, slowed down, occasionally stopped, and got out of the car to taunt police. Eventually, he jumped on the 101 and then on to the 405 with dozens of cruisers and interceptors in pursuit. Once he was on the 405, which the LAPD immediately shut down in both directions, he began firing at the pursuing police vehicles. Thankfully, despite Flores and officers firing wild from moving vehicles, no one was hit during the short firefight. "This is one of the most intense chase scenes I've ever seen," said KABC reporter Desmond Shaw who was riding in the station's Sky2 helicopter. At around 12:20 a.m., Flores approached the Sunset Boulevard off ramp and pursuing officers decided that they'd had enough of his shenanigans. Police called in two SWAT vehicles which hemmed him in and forced him to stop using a PIT maneuver. Officers then sent in a K-9 unit to bring Flores down. Once the dog had him under control, police arrested him and charged Flores with attempted murder. Related Video:

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.