2006 Acura Rsx Type S Call Now 201-376-8510 on 2040-cars

Auto blog

1997 Acura SLX gets 350 actual Acura horsepower for Radwood

For the Radwood Orange County, Calif., car show, a show themed around 1980s and 1990s cars, Acura is bringing a variety of its original models including a 1991 NSX and a 1986 Integra. The company is also bringing something obscure, a 1997 Acura SLX, the brand's first SUV, offered from model years 1996 to 1999. In some ways, it's something Acura might not want to highlight, since it's really a rebadged Isuzu Trooper, just as the original Honda Passport was a rebadged Isuzu Rodeo. But this SLX is special; it has real Acura power under the hood. The project was led by Acura engineers and Pikes Peak racing drivers James Robinson, Paul Hubers and Jordan Guitar, and the frame and body restoration as well as the powertrain swap was done entirely in-house at Honda R&D in Ohio, according to Acura rep Andrew Quillin. The team pulled out the original naturally aspirated 3.2-liter V6 that made just 190 horsepower and 188 pound-feet of torque, and dropped in a turbocharged 2.0-liter inline-four from a new Acura RDX. That engine also received a new intake, exhaust, turbo and ECU tune, which brought power up to an estimated 350 horsepower and 340 pound-feet of torque, similar to the Graham Rahal Performance RDX. Not only that, but the old-school four-wheel-drive system and live rear axle were dropped in favor of the RDX's indpendent suspension and torque vectoring "Super Handling All-Wheel Drive." "Dropped in" is a mischaracterization, though, as Acura had to weld new subframes front and rear to the existing frame to get the transverse engine and modern suspension to fit. Acura was careful to keep the SLX looking as close to the original as possible. On the outside, Acura repainted the SLX in a modern red paint available on the RDX, but retained the champagne lower moldings. The stock wheels were replaced with 17-inch Fifteen52 wheels, but they have a very similar design and finish to the original wheels. A hard-shell spare tire cover was added, and a simple "SH-AWD" badge on the back is the only hint at what's under the body. The interior was restored at the company's L.A. design studio, where the upholstery was redone in a gray "gathered" leather like you would have seen when it was new. A bit of gray wood trim updates the interior slightly. The RDX's push-button starter and shifter buttons have been added to the center console, shift paddles behind the original steering wheel, and an aftermarket instrument cluster mounted to the steering column.

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Acura MDX design lead details the crossover from beginning to today

Catalin Matei, principal designer at Acura, was the exterior design lead for the original 2001 MDX and had the same job for the new MDX Prototype. That’s just plain cool, and it makes him the MDX person of record when it comes to design.  Thankfully, Acura put him in front of a camera with the original and the new Prototype to talk design. That video is at the top of this post. MateiÂ’s background gives him a unique perspective on how MDX design has changed throughout the years. In the video, he walks us through his and AcuraÂ’s thinking and rationale for the three-row crossoverÂ’s design both then and now. ItÂ’s a great watch, as you learn how AcuraÂ’s crossover design philosophy has changed over the years. Where the original design tried to be elegant and clean, the new MDX takes a stab at sportiness and performance. This line of thinking is in tune with all of AcuraÂ’s most recent designs following the “Precision Crafted Performance” mantra. 2001 Acura MDX View 11 Photos Specifics on how the carÂ’s design has changed are called out by Matei. For example, grille design — itÂ’s much bigger now! The character line that wrapped around the original MDX has moved upward in the new MDX. This gives the new crossover a broad-shouldered and strong look that the old MDX just didnÂ’t have. And you probably wouldÂ’ve never guessed this, but the bodyside sculpting was inspired by the rocks in the Antelope Canyon. WeÂ’re not totally convinced.  One downside from the slick and “sporty” design may be unintentionally called out. The third row of seats is almost entirely shrouded by the body, as opposed to the massive windows in the original MDX. Those in the rearmost seats will have a much more claustrophobic experience than everybody else in the car. If you want all the details we know about the upcoming next-gen MDX, check out our reveal post here. Also, bookmark this page. WeÂ’ll check back in with Matei 20 years from now for the 2040 Acura MDX reveal. Related gallery: MDX Prototype View 35 Photos