2005 Acura Rsx Type-s // One-owner // No Reserve on 2040-cars

Auto blog

2019 Acura RDX crossover gets turbocharged power, A-Spec version

NEW YORK — Calling the RDX that Acura showed at this year's Detroit Auto Show a "concept" was stretching that term to the limits of credulity. The production version of the 2019 RDX is here, and this turbocharged crossover with available AWD looks darn near identical. While it offers all-wheel drive like its Lexus NX and Audi Q3 competitors, Acura's next-generation SH-AWD should be a serious selling point. Let's cover that "Super Handling All-Wheel Drive" system for a moment. It takes power from the 2.0-liter, 272 horsepower and 280 pound-feet of torque engine and routes it up to 70 percent rearward, and there's real torque vectoring (rather than brake-based faux vectoring) to shift 100 percent of that rear axle power to either wheel. The broad strokes are similar to the outgoing model's system, but there's much more available rear power bias — in the 2016 model, up to 40 percent could be sent to the rear. And that was up from 25 percent for pre-2016 models. The takeaway is that the RDX should handle a lot better on both dry and slippery pavement, and feel a bit sportier doing it. A new engine may help as well. The outgoing 3.5-liter V6 is replaced by a turbocharged four-cylinder, almost certainly related to the unit in the Accord and Civic Type R, and tuned somewhere in between those cars (252 and 306 horsepower, respectively). We expect the new engine to be lighter than the old V6, and less weight off the front end should improve steering feel and handling. For those keeping track, the new engine is down 7 horsepower but up 28 pound-feet in torque, and thanks to turbocharging the torque band starts down low and is relatively flat, so more oomph from a stop and on through the rev range. The six-speed automatic is gone, replaced by a 10-speed automatic. Most of its competitors use six- or eight-speed units, so that'll be a marketing focus. As you'd expect, the individual ratios are closer-spaced but the total ratio spread is, according to Acura, 62 percent wider than the outgoing automatic. There are steering-wheel-mounted paddles if you'd like to shift yourself. Since the styling is very much a lightly retouched Prototype RDX from the Detroit show, it's nice to be able to give a sense of the new car's proportions with hard numbers. First of all, it's riding on a 2.6-inch longer wheelbase. Overall length is 187 inches, up from 184.4, and width is unspecified.

Ford tumbles to second worst in Consumer Reports reliability survey, list dominated by Japanese [w/video]

It's no secret that MyFord Touch has had its share of problems since being introduced, but the most recent reliability survey from Consumer Reports shows just how much this infotainment system has affected Ford. Just two years ago, the automaker was in the top 10 for the institute's reliability rankings, but since then, it has tumbled to the second-lowest rung just above dead-last Jaguar. In addition to MyFord Touch, CR also attributes a handful of new products that have had issues right out of the gate.
Compiled from 1.2 million subscriber surveys, this year's auto reliability survey heavily favors Japanese automakers, with eight of the 10 spots hailing from Japan. Toyota brands grabbed the top three spots (Scion, Toyota and Lexus - in that order) with Mazda, Subaru, Honda and Acura filling the next four spots. The only non-Asian automaker cracking the top 10 was Audi at number eight.
Audi climbed a total of 18 spots from last year, and Cadillac and GMC round out this year's top gainers breaking into the top 15. Helping Cadillac's upward movement, the CTS Coupe was named the most reliable domestic car. Lincoln, Volvo and Chrysler join Ford on this year's biggest loser list.

Honda finds new Green Path to reduce CO2 emissions

In the wake of the Volkswagen diesel scandal, it's impossible to hear an automaker talk about its overall environmental efforts and not think to yourself, "for real?" Still, we're willing to listen. And Honda representatives gave it their best shot yesterday in Marysville, OH as they introduced a small group of journalist to the company's expanded initiative aimed at cutting CO2 emissions and the total life-cycle environmental impact of Honda products. Called Green Path, the initiative now includes a $210-million expansion at Honda's Marysville, OH manufacturing plant to install a better, cleaner paint shop. Speaking at the facility yesterday, Honda representatives said that the plant room is not only better for the environment (it uses limestone dust instead of water to capture paint particles, for example, reducing water usage by about 2 million gallons annually. Overall, the new paint shop will have 60 percent less VOC emissions and reduce CO2 emissions by 18 percent), it also makes the cars look better. That's whey the two-step temperature curing process will initially only be used on Acuras to differentiate them from the competition. Honda will fire up trials in late 2017. There's more to Green Path than the new paint show, of course. The company wants to reduce - in some cases eliminate - what it calls substances of concern (SOCs), things like lead and mercury. There are also new wind turbines in Ohio to supply power to Honda plants, the Environmental Leadership Program for independent dealerships to make their own green moves, and swapping out fluorescent light bulbs for LEDs, among other efforts. In the Marysville Auto Plant, for example, the Assembly department has over 10,000 task light bulbs. The fluorescent ones used to need to be replaced every three years, but the new LEDs have a life span of 16 years. Honda says that calculating up the impact of all of these little changes will remove an average of 3.822 kilograms of CO2 from the production tally of each car it makes. The company's stated goal is to reduce its total greenhouse gas emissions by 50 percent (compared to 2000 levels) by 2050. You can find out more in Honda's press release and video, below. Honda Announces New "Green Path" Initiative to Reduce Total Life-Cycle Environmental Impact MARYSVILLE, Ohio (Sept.