2006 Acura Rl Base Sedan 4-door 3.5l on 2040-cars

Auto blog

Honda marks 20 million vehicles made in the USA

Japanese automakers manufacturing in the United States is nothing new. But it was in November of 1982 when the first Honda Accord rolled off the assembly line in Marysville, OH. It was the first Japanese vehicle assembled in the US, and in the nearly 32 years since, Honda has made 10 million Accords here for a total of 20 million cars manufactured in America - enough to span from New York to San Francisco twenty times. It's that double landmark which Honda is now celebrating.
Honda has come a long way in those three decades, keeping that original plant in Marysville on line while expanding to three more - in East Liberty, OH; Lincoln, AL; and Greensburg, IN - with a fifth plant (the Performance Manufacturing Center) opening on the same site in Marysville to build the Acura NSX next year. It also builds engines in Lincoln and in Anna, OH, and automatic transmissions at Russells Point, OH, and Tallapoosa, GA.
Between those seven sites, Honda produces 11 different models, including the Accord, Civic, Crosstour, CR-V, Pilot, Odyssey and Ridgeline as well as the Acura ILX, TL, RDX and MDX. Production keeps on ramping up as Honda produced a record 1.3 million vehicles in the US last year, 95 percent of which are sold in the US. Scope out the details in the press release below and click the image above to see it all laid out in a handy infographic.

Inside Honda's ghost town for testing autonomous cars

On the edge of the San Francisco suburb of Concord, California sits a ghost town. Dilapidated buildings and cracked roads are framed by overgrowth and slightly askew street signs. The decommissioned five acre portion of the Concord Naval Weapons Station that once housed military personnel and their families is now home to squirrels, jack rabbits, wild turkeys and Honda's mysterious testing lab for autonomous vehicles. This former town within a Naval base – now dubbed "GoMentum Station" – is the perfect testing ground for Honda's self-driving cars. An almost turn-key solution to the problem of finding somewhere to experiment with autonomous vehicle inside an urban area. Thanks to the GoMentum Station, the automaker has access to 20 miles of various road types, intersections and infrastructure exactly like those found in the real world. Just, you know, without all the people getting in the way. While the faded lane markers and cracked asphalt might initially make it difficult for the car to figure out what's going on around it, that's exactly what you want when training a self-driving system. Many roads in the real world are also in dire need of upkeep. Just because autonomous vehicles are hitting the streets doesn't mean the funding needed to fix all the potholes and faded lane markers will magically appear. The real world doesn't work that way and the robot cars that will eventually make our commutes less of a headache will need to be aware of that. Plus, it's tougher to train a car to drive downtown than to barrel down the highway at 80 miles per hour. A company is going to want to get as much practice as possible. While semi-autonomous driving on the everyone-going-the-same-way-at-a-constant-speed freeway is already a reality, navigating in an urban environment is far more complex. If you've driven on the streets of Los Angeles, San Francisco, New York, Chicago or Seattle you know that driving downtown takes far more concentration than cruising down the interstate. With all that in mind, Honda's tricked out Acura RLX did a good job during an (admittedly very controlled) hands-free demo. It didn't hit either of the pedestrians walking across its path. It stopped at stop signs and even maneuvered around a mannequin situated in the middle of the road. The reality is, watching a car drive around the block and safely avoid stuff is boring. Not to metion, Google has been doing this for a while in the real world.

Acura's MDX SEMA concept took the wrong parts from the NSX GT3

When it comes to SEMA show cars, the more absurd the better, such as with the 1,040-horsepower Bisimoto Hyundai Santa Fe. That's not the case with Acura's custom MDX. This crossover was designed to match the NSX GT3 racecar, and gets a custom trailer to tow it. However, instead of doing something awesome like dropping in the NSX's twin-turbo V6, Acura decided the defining characteristics of the race car were the paint, splitter, and wing. So that's what the MDX and trailer got. In addition to a matching white paint scheme with orange and black accents, the SUV wears a massive front splitter that looks like a shelf stuck close to the ground. It's the only aero modification on the vehicle, and it just looks silly, what with the massive gap between the base of the bumper and the splitter itself. There aren't any performance modifications on this SUV either, except the lowered suspension, so the only thing the splitter is likely to do is break off on the first mildly steep driveway it comes across. To complement the MDX's dubious aero aid, the custom trailer gets a "wing" at the back. Actually, it looks like Acura slapped some endplates on the back to give it a wing look. The trailer also gets running boards that extend the splitter along the side. Maybe it all works together to keep the trailering rig planted. But probably not. If Acura wants suggestions for next time, we suggest a mid-engined MDX, or perhaps one with a wild hybrid system. We'll call this a missed opportunity. Related Video: Featured Gallery Acura MDX with custom NSX GT3 Trailer: SEMA 2016 View 11 Photos Related Gallery 2017 Acura MDX SEMA concept Image Credit: Live photos copyright 2016 Drew Phillips / Autoblog Design/Style SEMA Show Acura Crossover Racing Vehicles acura mdx acura nsx gt3