Base Suv 2.3l Cd Awd Turbocharged Power Steering Abs 4-wheel Disc Brakes on 2040-cars

Auto blog

2015 Acura TLX production gets underway in Ohio

It's been three months since Acura unveiled the supposedly production-ready TLX sedan at the New York Auto Show, but dealers have yet to receive any units to sell. That's because, as we reported back in April, production of the TLX was pushed back. We're glad to report now, however, that production has commenced at the Marysville Auto Plant in Ohio.
The Honda facility in Marysville, just south of Columbus, also produces the Accord sedan and coupe for local consumption and export. With over 30 years since its founding, the factory has previously handled production of the Acura TL and RDX as well as the company's Gold Wing motorcycles.
The Marysville Auto Plant is one of many facilities which Honda operates in Ohio. Among the others, you'll also find the East Liberty assembly plant that handles the Acura RDX as well as the Honda Crosstour and CR-V, an engine plant in Anna, a transmission factory in Russells Point, several R&D centers, component manufacturers and a new Performance Manufacturing Center being built to handle the coming NSX sports car in Marysville.

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video:

Hondata's 2019 Acura RDX tune brings the mid-range torque

One of the big advantages to the era of turbo Hondas is that there's plenty of horsepower and torque left on the table for tuners to take advantage of. One of those companies is Hondata, and following its upgrades for the Civic and Accord, it's now tuning the Acura RDX luxury crossover. The RDX uses a turbocharged 2.0-liter engine similar to those in the Accord and the Civic Type R. In stock form, it makes 272 horsepower and 280 pound-feet of torque. With Hondata's Stage 1 tune, the company says that horsepower increases by about 10 across the rev band. Looking at the dyno graph, it also appears that peak horsepower increases by about 5 horsepower, and peak torque is up by about 15 pound-feet. Peak torque also appears to arrive sooner, and most of the torque curve seems to be up by 10 to 15 pound-feet. The increases in power and torque are available in all four of the RDX's drive modes. The Stage 2 tune increases power torque even more in Sport and Sport+ modes, and keeps Snow and Comfort modes at Stage 1 settings. Peak horsepower looks to be up about 10 over stock, but the mid-range sees as much as a 28-hp increase. Peak torque sees a huge jump of about 45 lb-ft over stock based on the dyno chart, and it's available even lower than the Stage 1's peak torque. If this all sounds good to you, you can order up a Hondata FlashPro computer for your RDX right now. It costs $695 and comes with the handheld computer for uploading or removing tunes. RDX owners in California should note that neither tune is currently CARB legal. Related Video: