Acura Rdx 2011 One Owner 18,000 Miles No Reserve No Reserve Save Big on 2040-cars

Auto blog

Hands-on with Acura's novel touchpad infotainment interface

After Acura's Precision Cockpit was unveiled here in LA, I sat in the, uh, driver's seat of the wheel-less interior mockup to get a feel for how this new touchscreen-free touch interface works. There are a lot of good ideas inside. Here are 11 things you should know. It's less like a trackpad and more like a remote-control tablet. So instead of letting you move a cursor relative to its last location like the trackpad on a laptop, each point on Acura's trackpad is mapped to a corresponding point on the center display. If you want what's in the upper right corner of the display, you touch and click in the upper right corner of the trackpad. Simple. I figured it out in two minutes. Maybe less. The whole thing is surprisingly intuitive. The ease of use is helped by the fact that the targets on the screen are pretty big – no tiny "buttons" to fiddle with. The clicks are real. The trackpad actually moves when you press down, so no need for simulated haptic feedback. In their research, Acura engineers found that accidental touches and presses are a real issue. We could have told them that – hit a bump while using a finicky remote interface like Lexus's all-but-abandoned joystick thing, and you select an item half-way across the screen from the one you intended. The placement of the trackpad in this concept interior also helps avoid unintentional inputs – it's not in the middle of the center console where it might get brushed or bumped, but instead in its own little cave at the base of the center-stack waterfall. (Acura's low-profile button-based transmission selector suddenly makes a whole lot of sense.) View 13 Photos Lots of cues cut down on distraction. You hover over the option you want before positively confirming the selection with a hard press. There's no cursor to find and reposition like in the Lexus trackpad system The red highlight gives the necessary visual cue that you put your finger in the right place. The pad is slightly dished to give you a tactile cue of where the center and edges are. It allows you to build up muscle memory, sort of like how you know generally where the "keys" are on your smartphone or tablet's virtual keyboard by now. Or at least I do on mine. You look at the screen, not what you're touching. The problem with touch screens is that they have to be low down in the car so you can reach them. That means you have to look down from the road to stab at what you want.

Pair of perfect Honda NSX Type Rs go up for auction in Tokyo

While the original Acura NSX is a brilliant supercar in any of its iterations, we never got the best version of it here in America: the Type R. Those came with Honda badges and are right-hand drive only. Unless you're in Japan or are lucky enough to come see an imported example elsewhere, you're not going to come across one of these. To see two practically perfect examples go up for auction at the same time is an even rarer sight. Some first-generation NSX Type R models (1992-1995 model years) can be imported to the U.S. now that they have surpassed the 25-year mark. However, this 1995 model is still a hair too new. Should that stop you from buying it and waiting a few months to take U.S. delivery? Certainly not. This car being offered at Tokyo's BH Auction with a grand total of 534 miles on its odometer. The seller claims it's 100% original and in pristine condition. Honda did a lot to transform the NSX into the first Type R of many to come. To start, engineers cut 308 pounds out of the car by using aluminum in even more places than before, deleting sound deadening, eliminating the A/C and stereo and using carbon-kevlar Recaro bucket seats. The 3.0-liter V6 was balanced and blueprinted. Then the suspension was given a full makeover with stiffer dampers, springs, bushings and a larger front sway bar. There were plenty of other little things throughout, but we'll spare you the long list. The number you need to know most is the estimated auction price. BH Auction thinks this NSX Type R will go for $227,000 - $272,000. 2005 Honda NSX-R View 21 Photos Next up is the ultra-rare 2005 Honda NSX-R. This R was based-off the NA2 NSX, so it has a 3.2-liter V6 and six-speed manual transmission with the new bodystyle that ditches the pop-up headlights. The 2005 model year was the last for the first-gen NSX, meaning this R is just about as new as they come. Many of the modifications that Honda did for the first Type R were repeated here. This model used carbon fiber more judiciously, though, replacing the hood, deck lid and spoiler with the lightweight material. The auction house claims just 140 NA2 NSX-Rs were made, so this is an incredibly rare car. Sadly, nobody here will be able to import it and drive it on American roads for quite some time yet. The price is estimated to come in at $345,000 - $436,000. That's pricey but this NSX has an even lower odometer reading than the other at just 348 miles.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.