12 Turbo Charged Technology Pk Navi Roof Heated Leather Bluetooth Paddle Shifts on 2040-cars

Auto blog

Acura recalls 106K MDX models for AC system bolt

The National Highway Traffic Safety Administration is announcing a recall covering the air conditioning system on 106,439 units of the 2014-2015 Acura MDX. The affected examples have production dates between April 23, 2013, and December 16, 2014. While the problem doesn't create a major safety concern, it could be very annoying when driving during the intense heat of the summer months. On these luxury crossovers, the bolts on the air conditioning compressor clutch drive might not have the proper anti-corrosion coating. This makes it more likely for them to eventually break, and if that happens the AC pulley could fall off the CUVs. Acura reports no injuries or crashes form the issue, and the company discovered the issue through warranty claims for the air conditioning not working. To repair the problem, dealers will replace the bolts. They'll also inspect the AC clutch plate and will replace it if necessary, as well. The repairs for some owners should already be in progress, according to NHTSA. Related Video: RECALL Subject : A/C Compressor Clutch Drive Bolts may Corrode Report Receipt Date: JUL 01, 2015 NHTSA Campaign Number: 15V417000 Component(s): EQUIPMENT Potential Number of Units Affected: 106,439 All Products Associated with this Recall Vehicle Make Model Model Year(s) ACURA MDX 2014-2015 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Acura MDX and MDX AWD vehicles manufactured April 23,2013, to December 16, 2014. The affected vehicles have air conditioning compressor clutch drive bolts that may not have received the proper anti-corrosion coating. CONSEQUENCE: If a bolt was not coated, it may corrode and break as a result. If the bolt breaks, the compressor clutch plate may separate from the vehicle, possibly becoming a road hazard. REMEDY: Honda will notify owners, and dealers will replace the air conditioning compressor clutch drive bolt and install a new clutch plate if necessary, free of charge. The recall is expected to begin July 31, 2015. Owners may contact Acura client relations at 1-800-382-2238. Honda's number for this recall is JQ7. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Statement by Acura Regarding Air Conditioner Clutch Drive Bolt Recall: 2014-2015 Acura MDX Jun 25, 2015 - TORRANCE, Calif.

Rare 1999 Acura NSX Zanardi Edition sells for $135,000

Somebody just bought a 1999 Acura NSX Zanardi Edition for $135,000 on Bring a Trailer. And to that we say, we’re jealous. The Zanardi Edition is one of the more sought-after NSX models out there. Acura only ever sold 51 of them (named after racer Alex Zanardi), and they were sold during a time that nearly every NSX sold here was an NSX-T with the T-top. The hardtop Zanardi Edition features a number of performance improvements over a typical 1999 NSX. Acura took a sizable chunk of weight out of the car. Versus a hardtop coupe, itÂ’s about 54 pounds lighter. Compared to the more popular NSX-T, itÂ’s 149 pounds lighter. This was done in a few ways, but the single biggest weight reduction was due to the power steering delete, making it more like the older NSXs that never had power steering. Lightweight BBS wheels, a lighter battery, single-pane rear glass and a lighter rear spoiler also helped to reduce weight. It received a “racetrack-tuned suspension” that was considerably stiffer than the regular NSX. The shocks, springs and bushings were all revised, and Acura lowered the ride height (0.6 inch in front, 0.3 inch in rear). A stiffer and larger rear stabilizer bar was fitted, too. The Zanardi Edition is rather distinctive looking because of its New Formula Red paint and dark BBS wheels. Acura added red stitching to the all black interior, and owners also got to use a sweet titanium shift knob. And of course, thereÂ’s a special edition plaque on the interior to officially declare it a Zanardi.  Acura did nothing to the engine or transmission. Therefore, it retains the 3.2-liter V6 (290 horsepower and 224 pound-feet of torque) and six-speed manual. We donÂ’t get to see many Zanardi Editions go up for sale, but when they do, they get the big bucks. At 57,000 miles, this one is still on the low side, hence the $135,000 final bid. A regular (albeit newer) 2004 NSX-T with 1,900 miles just sold for $133,000 earlier today. So yeah Â… NSX values donÂ’t seem to be going anywhere but up these days. Related video:

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.