4dr Suv Acura Mdx Suv Automatic Gasoline 3.5l Pgm-fi Sohc 24-valve V6 Engine W/v on 2040-cars

Auto blog

Hands-on with Acura's novel touchpad infotainment interface

After Acura's Precision Cockpit was unveiled here in LA, I sat in the, uh, driver's seat of the wheel-less interior mockup to get a feel for how this new touchscreen-free touch interface works. There are a lot of good ideas inside. Here are 11 things you should know. It's less like a trackpad and more like a remote-control tablet. So instead of letting you move a cursor relative to its last location like the trackpad on a laptop, each point on Acura's trackpad is mapped to a corresponding point on the center display. If you want what's in the upper right corner of the display, you touch and click in the upper right corner of the trackpad. Simple. I figured it out in two minutes. Maybe less. The whole thing is surprisingly intuitive. The ease of use is helped by the fact that the targets on the screen are pretty big – no tiny "buttons" to fiddle with. The clicks are real. The trackpad actually moves when you press down, so no need for simulated haptic feedback. In their research, Acura engineers found that accidental touches and presses are a real issue. We could have told them that – hit a bump while using a finicky remote interface like Lexus's all-but-abandoned joystick thing, and you select an item half-way across the screen from the one you intended. The placement of the trackpad in this concept interior also helps avoid unintentional inputs – it's not in the middle of the center console where it might get brushed or bumped, but instead in its own little cave at the base of the center-stack waterfall. (Acura's low-profile button-based transmission selector suddenly makes a whole lot of sense.) View 13 Photos Lots of cues cut down on distraction. You hover over the option you want before positively confirming the selection with a hard press. There's no cursor to find and reposition like in the Lexus trackpad system The red highlight gives the necessary visual cue that you put your finger in the right place. The pad is slightly dished to give you a tactile cue of where the center and edges are. It allows you to build up muscle memory, sort of like how you know generally where the "keys" are on your smartphone or tablet's virtual keyboard by now. Or at least I do on mine. You look at the screen, not what you're touching. The problem with touch screens is that they have to be low down in the car so you can reach them. That means you have to look down from the road to stab at what you want.

2025 Acura ZDX First Drive Review: First electric Acura or alternative Cadillac?

MONTECITO, Calif. Í– The 2025 Acura ZDX not only looks like an Acura, but it’s arguably one of the best-looking Acuras ever. If weÂ’re talking SUVs, whatÂ’s going to topple it from the podium? The original ZDX? Beneath that skin, however, itÂ’s no secret that the new ZDX rides on General MotorsÂ’ Ultium electric platform, has an interior constructed with General Motors parts, and is even built by General Motors in Tennessee. Ultimately, though, the most GM thing about the ZDX may be this overall assessment of it: This electric SUV provides more performance and features for the money than competitors, but the interior is a real letdown. Sure sounds like any performance Cadillac from the past two decades to me. The trouble for the ZDX is that the competitor it most closely aligns with in terms of price, feature content and EV specs is literally a Cadillac Â… but things have changed. Specifically, the Cadillac Lyriq doesnÂ’t suffer from that whole “interior is a real letdown” thing. Far from it, itÂ’s a reason to buy a Lyriq. Furthermore, the two EVs not only share the same Ultium platform, but their motor offerings are basically the same with power outputs and ranges that closely align. ItÂ’s therefore impossible not to keep coming back to comparisons between the two. Even if the ZDX is a decent value, complete with its $7,500 federal tax credit, why get one instead of the more luxurious Lyriq? In short, it comes with even more features for the money, and boasts the sort of chassis upgrades and handling acumen Cadillac has moved away from with the Lyriq.   So thatÂ’s where that comparison rests, and although IÂ’ll get back into that whole “not really an Acura” angle, letÂ’s take a closer look at the specs that more objectively let the new ZDX stack up well to vehicles that arenÂ’t mechanically related. There are three versions of the ZDX, with no options apart from color and a summer-tire option. Starting at $65,850, including destination but not the federal tax credit, the base ZDX A-Spec becomes the only other rear-wheel-drive Acura besides the first NSX. It produces 358 horsepower and 324 pound-feet of torque, and achieves an EPA-estimated range of 313 miles from its 102-kilwatt-hour battery pack. These specs are roughly equal to the rear-motor Lyriq and Chevy Blazer EV, but they amount to a stronger proposition than anything offered by Hyundai/Kia/Genesis, while comparable luxury models are considerably more expensive.

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.